# Biomass to chemicals: catalytic valorisation of lignocellulose

> How a biorefinery turns wood into chemicals. Lignocellulose — cellulose microfibrils wrapped in hemicellulose and set in lignin — is first fractionated so the lignin is not condensed: reductive catalytic fractionation gives a lignin oil of phenolic monomers and dimers and a carbohydrate pulp. The sugars go on to furans: fructose to 5-hydroxymethylfurfural at 80% selectivity, glucose to HMF in yields near 70% with chromium chloride in an ionic liquid — building blocks for plastics and fine chemicals.

- Page: https://www.labcanvas.com/templates/graphical-abstracts/biomass-chemicals-catalytic-valorisation-lignocellulose
- Open in the LabCanvas editor (LabCanvas account): https://www.labcanvas.com/editor.html?template=biomass-to-chemicals-lignocellulose-valorisation
- Updated: 2026-10-14
- Category: Graphical abstracts
- Method: Graphical abstract
- Starting materials: Wood or other lignocellulosic biomass
- Product: Phenolic monomers from lignin; sugars and furans (HMF) from the carbohydrates
- Key result: HMF 80% selectivity at 90% fructose conversion, 10–50 wt% fructose (Román-Leshkov et al. 2006); HMF yield near 70% from glucose (Zhao et al. 2007)
- Figure: 1920 × 1080 px, 72 editable layers (7 generated objects with settings)

## Steps

1. **The feedstock**: Wood is cellulose, hemicelluloses, lignin and pectins (Plomion et al. 2001); hemicelluloses bind cellulose and lignin (Scheller & Ulvskov 2010)
2. **Fractionate, lignin first**: Keep lignin from condensing (Schutyser et al. 2018): reductive catalytic fractionation gives phenolic monomers and dimers and a carbohydrate pulp (Van den Bosch et al. 2015)
3. **Lignin to aromatics**: Depolymerise, then upgrade and funnel the mixture toward a few target chemicals (Schutyser et al. 2018)
4. **Sugars to furans**: Fructose to HMF at 80% selectivity, 90% conversion (Román-Leshkov et al. 2006); glucose to HMF near 70% with CrCl₂ in an ionic liquid (Zhao et al. 2007)

## Uses

- Graphical abstracts on biorefineries and biomass conversion
- Teaching lignocellulose structure and valorisation
- Talks on lignin-first and furan platform chemicals

## References

1. Plomion, Leprovost & Stokes, “Wood formation in trees”, Plant Physiol. 2001. https://doi.org/10.1104/pp.010816 (review)
2. Scheller & Ulvskov, “Hemicelluloses”, Annu. Rev. Plant Biol. 2010. https://doi.org/10.1146/annurev-arplant-042809-112315 (review)
3. Zhou, Xia, Lin, Tong & Beltramini, “Catalytic conversion of lignocellulosic biomass to fine chemicals and fuels”, Chem. Soc. Rev. 2011. https://doi.org/10.1039/c1cs15124j (review)
4. Schutyser et al., “Chemicals from lignin: an interplay of lignocellulose fractionation, depolymerisation, and upgrading”, Chem. Soc. Rev. 2018. https://doi.org/10.1039/c7cs00566k (review)
5. Van den Bosch et al., “Reductive lignocellulose fractionation into soluble lignin-derived phenolic monomers and dimers and processable carbohydrate pulps”, Energy Environ. Sci. 2015. https://doi.org/10.1039/C5EE00204D (primary)
6. Román-Leshkov, Chheda & Dumesic, “Phase modifiers promote efficient production of hydroxymethylfurfural from fructose”, Science 2006. https://doi.org/10.1126/science.1126337 (primary)
7. Zhao, Holladay, Brown & Zhang, “Metal chlorides in ionic liquid solvents convert sugars to 5-hydroxymethylfurfural”, Science 2007. https://doi.org/10.1126/science.1141199 (primary)
8. Bozell & Petersen, “Technology development for the production of biobased products from biorefinery carbohydrates — the US Department of Energy’s “Top 10” revisited”, Green Chem. 2010. https://doi.org/10.1039/b922014c (review)

Credit: Drawn by LabCanvas after Plomion et al., Plant Physiol. 2001 (doi:10.1104/pp.010816); Scheller & Ulvskov, Annu. Rev. Plant Biol. 2010 (doi:10.1146/annurev-arplant-042809-112315); Zhou et al., Chem. Soc. Rev. 2011 (doi:10.1039/c1cs15124j); Schutyser et al., Chem. Soc. Rev. 2018 (doi:10.1039/c7cs00566k); Van den Bosch et al., Energy Environ. Sci. 2015 (doi:10.1039/C5EE00204D); Román-Leshkov et al., Science 2006 (doi:10.1126/science.1126337); Zhao et al., Science 2007 (doi:10.1126/science.1141199); Bozell & Petersen, Green Chem. 2010 (doi:10.1039/b922014c). Cell wall schematic.

## Questions

**What does the “Biomass to chemicals: catalytic valorisation of lignocellulose” template show?** How a biorefinery turns wood into chemicals. Lignocellulose — cellulose microfibrils wrapped in hemicellulose and set in lignin — is first fractionated so the lignin is not condensed: reductive catalytic fractionation gives a lignin oil of phenolic monomers and dimers and a carbohydrate pulp. The sugars go on to furans: fructose to 5-hydroxymethylfurfural at 80% selectivity, glucose to HMF in yields near 70% with chromium chloride in an ionic liquid — building blocks for plastics and fine chemicals.

**What are the steps shown in “Biomass to chemicals: catalytic valorisation of lignocellulose”?** 1. The feedstock: Wood is cellulose, hemicelluloses, lignin and pectins (Plomion et al. 2001); hemicelluloses bind cellulose and lignin (Scheller & Ulvskov 2010). 2. Fractionate, lignin first: Keep lignin from condensing (Schutyser et al. 2018): reductive catalytic fractionation gives phenolic monomers and dimers and a carbohydrate pulp (Van den Bosch et al. 2015). 3. Lignin to aromatics: Depolymerise, then upgrade and funnel the mixture toward a few target chemicals (Schutyser et al. 2018). 4. Sugars to furans: Fructose to HMF at 80% selectivity, 90% conversion (Román-Leshkov et al. 2006); glucose to HMF near 70% with CrCl₂ in an ionic liquid (Zhao et al. 2007).

**What are the starting materials and the product?** Starting materials: Wood or other lignocellulosic biomass. Product: Phenolic monomers from lignin; sugars and furans (HMF) from the carbohydrates.

**Which papers is “Biomass to chemicals: catalytic valorisation of lignocellulose” based on?** Plomion, Leprovost & Stokes, “Wood formation in trees”, Plant Physiol. 2001 (doi:10.1104/pp.010816); Scheller & Ulvskov, “Hemicelluloses”, Annu. Rev. Plant Biol. 2010 (doi:10.1146/annurev-arplant-042809-112315); Zhou, Xia, Lin, Tong & Beltramini, “Catalytic conversion of lignocellulosic biomass to fine chemicals and fuels”, Chem. Soc. Rev. 2011 (doi:10.1039/c1cs15124j); Schutyser et al., “Chemicals from lignin: an interplay of lignocellulose fractionation, depolymerisation, and upgrading”, Chem. Soc. Rev. 2018 (doi:10.1039/c7cs00566k); Van den Bosch et al., “Reductive lignocellulose fractionation into soluble lignin-derived phenolic monomers and dimers and processable carbohydrate pulps”, Energy Environ. Sci. 2015 (doi:10.1039/C5EE00204D); Román-Leshkov, Chheda & Dumesic, “Phase modifiers promote efficient production of hydroxymethylfurfural from fructose”, Science 2006 (doi:10.1126/science.1126337); Zhao, Holladay, Brown & Zhang, “Metal chlorides in ionic liquid solvents convert sugars to 5-hydroxymethylfurfural”, Science 2007 (doi:10.1126/science.1141199); Bozell & Petersen, “Technology development for the production of biobased products from biorefinery carbohydrates — the US Department of Energy’s “Top 10” revisited”, Green Chem. 2010 (doi:10.1039/b922014c).

**Can I edit the “Biomass to chemicals: catalytic valorisation of lignocellulose” template?** Yes. Open it in the LabCanvas editor: all 72 layers are editable, including 7 generated objects (structures, plots, equipment) with their own settings. Change the text, colours and layout, then export PNG, TIFF or PDF at the width and DPI the journal asks for.

**Do I need an account to use this template?** Not to view it here. To open and edit it, sign in to LabCanvas or create a free account (the free plan keeps up to 3 designs). Downloading the figure is part of LabCanvas Pro (US$19 a month or US$199 a year).
