# CALF-20 for CO₂ capture: from the pore to the plant

> A rising staircase of frames follows a metal–organic framework from ångströms to tonnes: CO₂ held in the pores of CALF-20 while water stays out below 40 % humidity; measured CO₂ isotherms at 273 and 323 K and the isosteric heat computed from them; IAST CO₂/N₂ selectivity of about 200, 2.6 mmol g⁻¹ from flue-gas CO₂ and more than 450,000 steam cycles; and a two-bed vacuum temperature swing plant, for a framework now made by the multikilogram.

- Page: https://www.labcanvas.com/templates/graphical-abstracts/calf-20-co2-capture-pore-plant
- Open in the LabCanvas editor (LabCanvas account): https://www.labcanvas.com/editor.html?template=calf-20-mof-co2-capture-pore-to-plant
- Updated: 2026-10-14
- Category: Graphical abstracts
- Method: Graphical abstract
- Starting materials: CALF-20, Zn₂(1,2,4-triazolate)₂(oxalate), made in one step and scaled to multikilogram batches
- Product: A durable physisorbent for capturing CO₂ from wet flue gas in swing-adsorption plants
- Key result: > 450,000 steam cycles (Lin et al. 2021); IAST 209 (1 bar) and 277 (5 bar) (Pereira et al. 2025); 2.6 mmol g⁻¹ at 0.15 bar, 298 K; Qst 39.1 kJ mol⁻¹
- Figure: 1920 × 1080 px, 66 editable layers (3 generated objects with settings)

## Steps

1. **The pore**: CALF-20 physisorbs CO₂ and is selective over water: CO₂ is taken up in preference below 40 % relative humidity and suppresses water sorption (Lin et al. 2021)
2. **The lab**: CO₂ isotherms at 273 and 323 K (Oktavian et al. 2024) give the isosteric heat by Clausius–Clapeyron; zero-loading Qst 39.1 kJ mol⁻¹ (Pereira et al. 2025); a low enthalpic regeneration penalty (Lin et al. 2021)
3. **Selectivity and durability**: IAST CO₂/N₂ selectivity 209 at 1 bar and 277 at 5 bar, 15/85 at 298 K (Pereira et al. 2025); 2.6 mmol g⁻¹ at 0.15 bar and 298 K (quoted by Oktavian et al. 2024); > 450,000 steam cycles and wet acid gases (Lin et al. 2021)
4. **The plant**: Multikilogram batches and composites (Lin et al. 2021); production scaled up by Svante with BASF (Oktavian et al. 2024); CO₂ captured and released in swing-adsorption beds

## Uses

- Graphical abstracts on MOFs for carbon capture
- Talks on adsorbent screening: isotherms, Qst, IAST and cycling
- Teaching how a sorbent goes from the pore to a capture plant

## References

1. Lin et al., “A scalable metal-organic framework as a durable physisorbent for carbon dioxide capture”, Science 2021. https://doi.org/10.1126/science.abi7281 (primary)
2. Oktavian et al., “Gas adsorption and framework flexibility of CALF-20 explored via experiments and simulations”, Nat. Commun. 2024. https://doi.org/10.1038/s41467-024-48136-0 (primary)
3. Pereira et al., “Enhancing CO2 capture via fast microwave-assisted synthesis of the CALF-20 metal–organic framework”, Inorg. Chem. 2025. https://doi.org/10.1021/acs.inorgchem.4c04727 (primary)

Credit: Drawn by LabCanvas after Lin et al., Science 2021 (doi:10.1126/science.abi7281); Oktavian et al., Nat. Commun. 2024 (doi:10.1038/s41467-024-48136-0), isotherm data; Pereira et al., Inorg. Chem. 2025 (doi:10.1021/acs.inorgchem.4c04727), IAST selectivity. Pore view and plant schematic.

## Questions

**What does the “CALF-20 for CO₂ capture: from the pore to the plant” template show?** A rising staircase of frames follows a metal–organic framework from ångströms to tonnes: CO₂ held in the pores of CALF-20 while water stays out below 40 % humidity; measured CO₂ isotherms at 273 and 323 K and the isosteric heat computed from them; IAST CO₂/N₂ selectivity of about 200, 2.6 mmol g⁻¹ from flue-gas CO₂ and more than 450,000 steam cycles; and a two-bed vacuum temperature swing plant, for a framework now made by the multikilogram.

**What are the steps shown in “CALF-20 for CO₂ capture: from the pore to the plant”?** 1. The pore: CALF-20 physisorbs CO₂ and is selective over water: CO₂ is taken up in preference below 40 % relative humidity and suppresses water sorption (Lin et al. 2021). 2. The lab: CO₂ isotherms at 273 and 323 K (Oktavian et al. 2024) give the isosteric heat by Clausius–Clapeyron; zero-loading Qst 39.1 kJ mol⁻¹ (Pereira et al. 2025); a low enthalpic regeneration penalty (Lin et al. 2021). 3. Selectivity and durability: IAST CO₂/N₂ selectivity 209 at 1 bar and 277 at 5 bar, 15/85 at 298 K (Pereira et al. 2025); 2.6 mmol g⁻¹ at 0.15 bar and 298 K (quoted by Oktavian et al. 2024); > 450,000 steam cycles and wet acid gases (Lin et al. 2021). 4. The plant: Multikilogram batches and composites (Lin et al. 2021); production scaled up by Svante with BASF (Oktavian et al. 2024); CO₂ captured and released in swing-adsorption beds.

**What are the starting materials and the product?** Starting materials: CALF-20, Zn₂(1,2,4-triazolate)₂(oxalate), made in one step and scaled to multikilogram batches. Product: A durable physisorbent for capturing CO₂ from wet flue gas in swing-adsorption plants.

**Which papers is “CALF-20 for CO₂ capture: from the pore to the plant” based on?** Lin et al., “A scalable metal-organic framework as a durable physisorbent for carbon dioxide capture”, Science 2021 (doi:10.1126/science.abi7281); Oktavian et al., “Gas adsorption and framework flexibility of CALF-20 explored via experiments and simulations”, Nat. Commun. 2024 (doi:10.1038/s41467-024-48136-0); Pereira et al., “Enhancing CO2 capture via fast microwave-assisted synthesis of the CALF-20 metal–organic framework”, Inorg. Chem. 2025 (doi:10.1021/acs.inorgchem.4c04727).

**Can I edit the “CALF-20 for CO₂ capture: from the pore to the plant” template?** Yes. Open it in the LabCanvas editor: all 66 layers are editable, including 3 generated objects (structures, plots, equipment) with their own settings. Change the text, colours and layout, then export PNG, TIFF or PDF at the width and DPI the journal asks for.

**Do I need an account to use this template?** Not to view it here. To open and edit it, sign in to LabCanvas or create a free account (the free plan keeps up to 3 designs). Downloading the figure is part of LabCanvas Pro (US$19 a month or US$199 a year).
