# Carbon dots and graphene quantum dots: from synthesis to bioimaging

> Two routes converge on one glowing dot: graphene oxide cut into ~10 nm graphene quantum dots (top-down) and small molecules carbonised into polymer-like carbon dots with quantum yields near 80 % (bottom-up). A live 3D close-up shows the graphitic core and its edge groups; to the right, excitation-dependent photoluminescence of N-doped GQDs, two-photon imaging in cells and optical imaging in live mice.

- Page: https://www.labcanvas.com/templates/graphical-abstracts/carbon-dots-graphene-quantum-dots-synthesis-bioimaging
- Open in the LabCanvas editor (LabCanvas account): https://www.labcanvas.com/editor.html?template=carbon-dots-graphene-quantum-dots-synthesis-to-bioimaging
- Updated: 2026-10-14
- Category: Graphical abstracts
- Method: Graphical abstract
- Starting materials: Oxidised graphene or nanotube soot (top-down); small organic molecules (bottom-up)
- Product: Fluorescent carbon dots and graphene quantum dots for imaging
- Key result: QY ca. 80 % (Zhu et al. 2013); GQDs ca. 10 nm (Pan et al. 2010); emission 478–604 nm, QY 12 % (Liu & Sun 2023)
- Figure: 1920 × 1080 px, 144 editable layers (5 generated objects with settings)

## Steps

1. **Found by accident**: Fluorescent carbon turned up when arc-made nanotubes were purified by electrophoresis (Xu et al. 2004)
2. **Top-down**: Hydrothermal cutting of oxidised graphene sheets gives water-soluble GQDs of ca. 10 nm with bright blue PL (Pan et al. 2010)
3. **Bottom-up**: A rapid, high-output route gives polymer-like carbon dots with quantum yields as high as ca. 80 % (Zhu et al. 2013)
4. **Light**: Surface passivation turns on strong, photostable PL without blinking (Sun et al. 2006); N-doped GQDs emit at 478–604 nm as the excitation moves from 370 to 560 nm, brightest at 460/522 nm, QY 12 % (Liu & Sun 2023)
5. **Image**: Two-photon luminescence under near-infrared pulses images cancer cells (Cao et al. 2007); the dots stay bright in live mice (Yang et al. 2009)

## Uses

- Graphical abstracts on carbon dots and GQDs
- Talks on fluorescent carbon nanomaterials for imaging and sensing
- Teaching top-down and bottom-up nanomaterial synthesis

## References

1. Xu et al., “Electrophoretic analysis and purification of fluorescent single-walled carbon nanotube fragments”, J. Am. Chem. Soc. 2004. https://doi.org/10.1021/ja040082h (method origin)
2. Sun et al., “Quantum-sized carbon dots for bright and colorful photoluminescence”, J. Am. Chem. Soc. 2006. https://doi.org/10.1021/ja062677d (primary)
3. Pan et al., “Hydrothermal route for cutting graphene sheets into blue-luminescent graphene quantum dots”, Adv. Mater. 2010. https://doi.org/10.1002/adma.200902825 (primary)
4. Zhu et al., “Highly photoluminescent carbon dots for multicolor patterning, sensors, and bioimaging”, Angew. Chem. Int. Ed. 2013. https://doi.org/10.1002/anie.201300519 (primary)
5. Cao et al., “Carbon dots for multiphoton bioimaging”, J. Am. Chem. Soc. 2007. https://doi.org/10.1021/ja073527l (primary)
6. Yang et al., “Carbon dots for optical imaging in vivo”, J. Am. Chem. Soc. 2009. https://doi.org/10.1021/ja904843x (primary)
7. Liu & Sun, “One-pot synthesis of nitrogen-doped graphene quantum dots and their applications in bioimaging and detecting copper ions in living cells”, ACS Omega 2023. https://doi.org/10.1021/acsomega.3c02705 (primary)
8. Baker & Baker, “Luminescent carbon nanodots: emergent nanolights”, Angew. Chem. Int. Ed. 2010. https://doi.org/10.1002/anie.200906623 (review)

Credit: Drawn by LabCanvas after Xu et al., J. Am. Chem. Soc. 2004 (doi:10.1021/ja040082h); Sun et al., J. Am. Chem. Soc. 2006 (doi:10.1021/ja062677d); Cao et al., J. Am. Chem. Soc. 2007 (doi:10.1021/ja073527l); Yang et al., J. Am. Chem. Soc. 2009 (doi:10.1021/ja904843x); Pan et al., Adv. Mater. 2010 (doi:10.1002/adma.200902825); Zhu et al., Angew. Chem. Int. Ed. 2013 (doi:10.1002/anie.201300519); Liu & Sun, ACS Omega 2023 (doi:10.1021/acsomega.3c02705); Baker & Baker, Angew. Chem. Int. Ed. 2010 (doi:10.1002/anie.200906623).

## Questions

**What does the “Carbon dots and graphene quantum dots: from synthesis to bioimaging” template show?** Two routes converge on one glowing dot: graphene oxide cut into ~10 nm graphene quantum dots (top-down) and small molecules carbonised into polymer-like carbon dots with quantum yields near 80 % (bottom-up). A live 3D close-up shows the graphitic core and its edge groups; to the right, excitation-dependent photoluminescence of N-doped GQDs, two-photon imaging in cells and optical imaging in live mice.

**What are the steps shown in “Carbon dots and graphene quantum dots: from synthesis to bioimaging”?** 1. Found by accident: Fluorescent carbon turned up when arc-made nanotubes were purified by electrophoresis (Xu et al. 2004). 2. Top-down: Hydrothermal cutting of oxidised graphene sheets gives water-soluble GQDs of ca. 10 nm with bright blue PL (Pan et al. 2010). 3. Bottom-up: A rapid, high-output route gives polymer-like carbon dots with quantum yields as high as ca. 80 % (Zhu et al. 2013). 4. Light: Surface passivation turns on strong, photostable PL without blinking (Sun et al. 2006); N-doped GQDs emit at 478–604 nm as the excitation moves from 370 to 560 nm, brightest at 460/522 nm, QY 12 % (Liu & Sun 2023). 5. Image: Two-photon luminescence under near-infrared pulses images cancer cells (Cao et al. 2007); the dots stay bright in live mice (Yang et al. 2009).

**What are the starting materials and the product?** Starting materials: Oxidised graphene or nanotube soot (top-down); small organic molecules (bottom-up). Product: Fluorescent carbon dots and graphene quantum dots for imaging.

**Which papers is “Carbon dots and graphene quantum dots: from synthesis to bioimaging” based on?** Xu et al., “Electrophoretic analysis and purification of fluorescent single-walled carbon nanotube fragments”, J. Am. Chem. Soc. 2004 (doi:10.1021/ja040082h); Sun et al., “Quantum-sized carbon dots for bright and colorful photoluminescence”, J. Am. Chem. Soc. 2006 (doi:10.1021/ja062677d); Pan et al., “Hydrothermal route for cutting graphene sheets into blue-luminescent graphene quantum dots”, Adv. Mater. 2010 (doi:10.1002/adma.200902825); Zhu et al., “Highly photoluminescent carbon dots for multicolor patterning, sensors, and bioimaging”, Angew. Chem. Int. Ed. 2013 (doi:10.1002/anie.201300519); Cao et al., “Carbon dots for multiphoton bioimaging”, J. Am. Chem. Soc. 2007 (doi:10.1021/ja073527l); Yang et al., “Carbon dots for optical imaging in vivo”, J. Am. Chem. Soc. 2009 (doi:10.1021/ja904843x); Liu & Sun, “One-pot synthesis of nitrogen-doped graphene quantum dots and their applications in bioimaging and detecting copper ions in living cells”, ACS Omega 2023 (doi:10.1021/acsomega.3c02705); Baker & Baker, “Luminescent carbon nanodots: emergent nanolights”, Angew. Chem. Int. Ed. 2010 (doi:10.1002/anie.200906623).

**Can I edit the “Carbon dots and graphene quantum dots: from synthesis to bioimaging” template?** Yes. Open it in the LabCanvas editor: all 144 layers are editable, including 5 generated objects (structures, plots, equipment) with their own settings. Change the text, colours and layout, then export PNG, TIFF or PDF at the width and DPI the journal asks for.

**Do I need an account to use this template?** Not to view it here. To open and edit it, sign in to LabCanvas or create a free account (the free plan keeps up to 3 designs). Downloading the figure is part of LabCanvas Pro (US$19 a month or US$199 a year).
