# CO₂ electroreduction: the catalyst picks the product, the cell sets the rate

> How the cathode decides what CO₂ becomes: gold and silver give CO, cadmium, indium, tin, lead and bismuth give formate, only copper goes on to hydrocarbons and alcohols, and where hydrogen binds too strongly H₂ wins — sorted by how strongly the metal binds H*, COOH* and CO*. Molecular and single-atom catalysts join the CO group (cobalt phthalocyanine on nanotubes above 95% Faradaic efficiency). Then the cell: feeding CO₂ as a gas in flow cells lifts current densities above 200 mA cm⁻².

- Page: https://www.labcanvas.com/templates/graphical-abstracts/co2-electroreduction-catalyst-picks-product-cell-sets-rate
- Open in the LabCanvas editor (LabCanvas account): https://www.labcanvas.com/editor.html?template=co2-electroreduction-catalyst-picks-the-product
- Updated: 2026-10-14
- Category: Graphical abstracts
- Method: Graphical abstract
- Starting materials: CO₂ and water, electrons from renewable power
- Product: CO, formate, hydrocarbons and alcohols, or hydrogen — depending on the cathode
- Key result: Product by metal at 5 mA cm⁻² (Hori et al. 1985); > 95% FE(CO), 15.0 mA cm⁻², TOF 4.1 s⁻¹ (Zhang et al. 2017); ~100% formate, > 10 h (Han et al. 2018); J > 200 mA cm⁻² in flow cells (Weekes et al. 2018)
- Figure: 1920 × 1080 px, 126 editable layers (3 generated objects with settings)

## Steps

1. **Sort by product**: At 5 mA cm⁻², Ag and Au gave mainly CO, Cd, In, Sn and Pb mainly formate, and Cu made CH₄ (Hori et al. 1985)
2. **Why**: The adsorption energies of H*, COOH* and CO* sort metals into H₂, CO, formic-acid and beyond-CO* groups (Bagger et al. 2017)
3. **CO**: Cobalt phthalocyanine on nanotubes: > 95% Faradaic efficiency, 15.0 mA cm⁻² at 0.52 V overpotential (Zhang et al. 2017); Ni single atoms in an AEM electrolyzer (Jiang et al. 2018)
4. **Formate**: Bismuth nanosheets: ~100% selectivity, stable > 10 h (Han et al. 2018)
5. **Beyond CO**: Only copper has shown a propensity for hydrocarbons and alcohols (Nitopi et al. 2019)
6. **The cell**: Gas-fed flow cells avoid the mass-transport limits of H-cells and reach > 200 mA cm⁻² (Weekes et al. 2018); assess catalysts at such current densities (Burdyny & Smith 2019)

## Uses

- Graphical abstracts on CO₂ electroreduction catalysts
- Talks comparing CO, formate and C₂₊ routes
- Teaching selectivity descriptors in electrocatalysis

## References

1. Hori, Kikuchi & Suzuki, “Production of CO and CH₄ in electrochemical reduction of CO₂ at metal electrodes in aqueous hydrogencarbonate solution”, Chem. Lett. 1985. https://doi.org/10.1246/cl.1985.1695 (primary)
2. Bagger, Ju, Varela, Strasser & Rossmeisl, “Electrochemical CO₂ reduction: a classification problem”, ChemPhysChem 2017. https://doi.org/10.1002/cphc.201700736 (primary)
3. Nitopi et al., “Progress and perspectives of electrochemical CO₂ reduction on copper in aqueous electrolyte”, Chem. Rev. 2019. https://doi.org/10.1021/acs.chemrev.8b00705 (review)
4. Han et al., “Ultrathin bismuth nanosheets from in situ topotactic transformation for selective electrocatalytic CO₂ reduction to formate”, Nat. Commun. 2018. https://doi.org/10.1038/s41467-018-03712-z (primary)
5. Zhang et al., “Highly selective and active CO₂ reduction electrocatalysts based on cobalt phthalocyanine/carbon nanotube hybrid structures”, Nat. Commun. 2017. https://doi.org/10.1038/ncomms14675 (primary)
6. Jiang et al., “Isolated Ni single atoms in graphene nanosheets for high-performance CO₂ reduction”, Energy Environ. Sci. 2018. https://doi.org/10.1039/c7ee03245e (primary)
7. Weekes, Salvatore, Reyes, Huang & Berlinguette, “Electrolytic CO₂ reduction in a flow cell”, Acc. Chem. Res. 2018. https://doi.org/10.1021/acs.accounts.8b00010 (review)
8. Burdyny & Smith, “CO₂ reduction on gas-diffusion electrodes and why catalytic performance must be assessed at commercially-relevant conditions”, Energy Environ. Sci. 2019. https://doi.org/10.1039/C8EE03134G (review)

Credit: Drawn by LabCanvas after Hori, Kikuchi & Suzuki, Chem. Lett. 1985 (doi:10.1246/cl.1985.1695); Bagger et al., ChemPhysChem 2017 (doi:10.1002/cphc.201700736); Nitopi et al., Chem. Rev. 2019 (doi:10.1021/acs.chemrev.8b00705); Han et al., Nat. Commun. 2018 (doi:10.1038/s41467-018-03712-z); Zhang et al., Nat. Commun. 2017 (doi:10.1038/ncomms14675); Jiang et al., Energy Environ. Sci. 2018 (doi:10.1039/c7ee03245e); Weekes et al., Acc. Chem. Res. 2018 (doi:10.1021/acs.accounts.8b00010); Burdyny & Smith, Energy Environ. Sci. 2019 (doi:10.1039/C8EE03134G). Grey tiles not classified here; surfaces and cell schematic.

## Questions

**What does the “CO₂ electroreduction: the catalyst picks the product, the cell sets the rate” template show?** How the cathode decides what CO₂ becomes: gold and silver give CO, cadmium, indium, tin, lead and bismuth give formate, only copper goes on to hydrocarbons and alcohols, and where hydrogen binds too strongly H₂ wins — sorted by how strongly the metal binds H*, COOH* and CO*. Molecular and single-atom catalysts join the CO group (cobalt phthalocyanine on nanotubes above 95% Faradaic efficiency). Then the cell: feeding CO₂ as a gas in flow cells lifts current densities above 200 mA cm⁻².

**What are the steps shown in “CO₂ electroreduction: the catalyst picks the product, the cell sets the rate”?** 1. Sort by product: At 5 mA cm⁻², Ag and Au gave mainly CO, Cd, In, Sn and Pb mainly formate, and Cu made CH₄ (Hori et al. 1985). 2. Why: The adsorption energies of H*, COOH* and CO* sort metals into H₂, CO, formic-acid and beyond-CO* groups (Bagger et al. 2017). 3. CO: Cobalt phthalocyanine on nanotubes: > 95% Faradaic efficiency, 15.0 mA cm⁻² at 0.52 V overpotential (Zhang et al. 2017); Ni single atoms in an AEM electrolyzer (Jiang et al. 2018). 4. Formate: Bismuth nanosheets: ~100% selectivity, stable > 10 h (Han et al. 2018). 5. Beyond CO: Only copper has shown a propensity for hydrocarbons and alcohols (Nitopi et al. 2019). 6. The cell: Gas-fed flow cells avoid the mass-transport limits of H-cells and reach > 200 mA cm⁻² (Weekes et al. 2018); assess catalysts at such current densities (Burdyny & Smith 2019).

**What are the starting materials and the product?** Starting materials: CO₂ and water, electrons from renewable power. Product: CO, formate, hydrocarbons and alcohols, or hydrogen — depending on the cathode.

**Which papers is “CO₂ electroreduction: the catalyst picks the product, the cell sets the rate” based on?** Hori, Kikuchi & Suzuki, “Production of CO and CH₄ in electrochemical reduction of CO₂ at metal electrodes in aqueous hydrogencarbonate solution”, Chem. Lett. 1985 (doi:10.1246/cl.1985.1695); Bagger, Ju, Varela, Strasser & Rossmeisl, “Electrochemical CO₂ reduction: a classification problem”, ChemPhysChem 2017 (doi:10.1002/cphc.201700736); Nitopi et al., “Progress and perspectives of electrochemical CO₂ reduction on copper in aqueous electrolyte”, Chem. Rev. 2019 (doi:10.1021/acs.chemrev.8b00705); Han et al., “Ultrathin bismuth nanosheets from in situ topotactic transformation for selective electrocatalytic CO₂ reduction to formate”, Nat. Commun. 2018 (doi:10.1038/s41467-018-03712-z); Zhang et al., “Highly selective and active CO₂ reduction electrocatalysts based on cobalt phthalocyanine/carbon nanotube hybrid structures”, Nat. Commun. 2017 (doi:10.1038/ncomms14675); Jiang et al., “Isolated Ni single atoms in graphene nanosheets for high-performance CO₂ reduction”, Energy Environ. Sci. 2018 (doi:10.1039/c7ee03245e); Weekes, Salvatore, Reyes, Huang & Berlinguette, “Electrolytic CO₂ reduction in a flow cell”, Acc. Chem. Res. 2018 (doi:10.1021/acs.accounts.8b00010); Burdyny & Smith, “CO₂ reduction on gas-diffusion electrodes and why catalytic performance must be assessed at commercially-relevant conditions”, Energy Environ. Sci. 2019 (doi:10.1039/C8EE03134G).

**Can I edit the “CO₂ electroreduction: the catalyst picks the product, the cell sets the rate” template?** Yes. Open it in the LabCanvas editor: all 126 layers are editable, including 3 generated objects (structures, plots, equipment) with their own settings. Change the text, colours and layout, then export PNG, TIFF or PDF at the width and DPI the journal asks for.

**Do I need an account to use this template?** Not to view it here. To open and edit it, sign in to LabCanvas or create a free account (the free plan keeps up to 3 designs). Downloading the figure is part of LabCanvas Pro (US$19 a month or US$199 a year).
