# Controlled radical polymerisation: ATRP, RAFT and the architectures they build

> Why ATRP and RAFT give polymers of one length and new shapes. In a conventional radical polymerisation chains start and terminate at random; in ATRP a copper (or ruthenium) complex and in RAFT a thiocarbonylthio agent cap the growing ends reversibly, so most chains sleep and all grow together — dispersities usually below 1.2. The ends stay alive, so a second monomer makes a block, and many arms or side chains make stars and bottlebrushes. A computed Poisson versus Flory distribution at the same length shows the difference.

- Page: https://www.labcanvas.com/templates/graphical-abstracts/controlled-radical-polymerisation-atrp-raft-architectures-they-build
- Open in the LabCanvas editor (LabCanvas account): https://www.labcanvas.com/editor.html?template=controlled-radical-polymerization-atrp-raft-architectures
- Updated: 2026-10-14
- Category: Graphical abstracts
- Method: Graphical abstract
- Starting materials: A vinyl monomer, an initiator and a control agent (a Cu or Ru complex with an alkyl halide for ATRP; a thiocarbonylthio compound for RAFT)
- Product: Chains of one length with living ends: blocks, stars, combs and brushes
- Key result: Đ usually < 1.2 (Chiefari et al. 1998); ppm-level ATRP catalysts (Matyjaszewski 2018); Poisson Đ = 1.01 vs Flory Đ = 1.99 at Xn = 100 (computed)
- Figure: 1920 × 1080 px, 69 editable layers (5 generated objects with settings)

## Steps

1. **Conventional**: Radicals start, grow and terminate at random, so chain lengths spread widely (a most-probable distribution has Đ ≈ 2, computed)
2. **ATRP**: A transition-metal complex moves a halogen atom on and off the chain end: Pₙ–X + Cuᴵ/L ⇌ Pₙ• + X–Cuᴵᴵ/L (Wang & Matyjaszewski 1995; Kato et al. 1995)
3. **RAFT**: A thiocarbonylthio agent swaps between chains by addition–fragmentation; dispersities usually < 1.2, sometimes < 1.1 (Chiefari et al. 1998)
4. **Architectures**: Living ends give gradient, block, comb and star polymers and densely grafted brushes (Matyjaszewski 2018; Moad, Rizzardo & Thang 2005)

## Uses

- Graphical abstracts on polymer synthesis
- Teaching living and controlled radical polymerisation
- Talks on block copolymers, stars and brushes

## References

1. Wang & Matyjaszewski, “Controlled/“living” radical polymerization. Atom transfer radical polymerization in the presence of transition-metal complexes”, J. Am. Chem. Soc. 1995. https://doi.org/10.1021/ja00125a035 (primary)
2. Kato, Kamigaito, Sawamoto & Higashimura, “Polymerization of methyl methacrylate with the carbon tetrachloride/dichlorotris(triphenylphosphine)ruthenium(II)/methylaluminum bis(2,6-di-tert-butylphenoxide) initiating system: possibility of living radical polymerization”, Macromolecules 1995. https://doi.org/10.1021/ma00109a056 (primary)
3. Chiefari et al., “Living free-radical polymerization by reversible addition–fragmentation chain transfer: the RAFT process”, Macromolecules 1998. https://doi.org/10.1021/ma9804951 (primary)
4. Moad, Rizzardo & Thang, “Living radical polymerization by the RAFT process”, Aust. J. Chem. 2005. https://doi.org/10.1071/CH05072 (review)
5. Matyjaszewski, “Advanced materials by atom transfer radical polymerization”, Adv. Mater. 2018. https://doi.org/10.1002/adma.201706441 (review)

Credit: Drawn by LabCanvas after Wang & Matyjaszewski, J. Am. Chem. Soc. 1995 (doi:10.1021/ja00125a035); Kato et al., Macromolecules 1995 (doi:10.1021/ma00109a056); Chiefari et al., Macromolecules 1998 (doi:10.1021/ma9804951); Moad, Rizzardo & Thang, Aust. J. Chem. 2005 (doi:10.1071/CH05072); Matyjaszewski, Adv. Mater. 2018 (doi:10.1002/adma.201706441). Distributions computed (Poisson and Flory, Xn = 100); chains schematic.

## Questions

**What does the “Controlled radical polymerisation: ATRP, RAFT and the architectures they build” template show?** Why ATRP and RAFT give polymers of one length and new shapes. In a conventional radical polymerisation chains start and terminate at random; in ATRP a copper (or ruthenium) complex and in RAFT a thiocarbonylthio agent cap the growing ends reversibly, so most chains sleep and all grow together — dispersities usually below 1.2. The ends stay alive, so a second monomer makes a block, and many arms or side chains make stars and bottlebrushes. A computed Poisson versus Flory distribution at the same length shows the difference.

**What are the steps shown in “Controlled radical polymerisation: ATRP, RAFT and the architectures they build”?** 1. Conventional: Radicals start, grow and terminate at random, so chain lengths spread widely (a most-probable distribution has Đ ≈ 2, computed). 2. ATRP: A transition-metal complex moves a halogen atom on and off the chain end: Pₙ–X + Cuᴵ/L ⇌ Pₙ• + X–Cuᴵᴵ/L (Wang & Matyjaszewski 1995; Kato et al. 1995). 3. RAFT: A thiocarbonylthio agent swaps between chains by addition–fragmentation; dispersities usually < 1.2, sometimes < 1.1 (Chiefari et al. 1998). 4. Architectures: Living ends give gradient, block, comb and star polymers and densely grafted brushes (Matyjaszewski 2018; Moad, Rizzardo & Thang 2005).

**What are the starting materials and the product?** Starting materials: A vinyl monomer, an initiator and a control agent (a Cu or Ru complex with an alkyl halide for ATRP; a thiocarbonylthio compound for RAFT). Product: Chains of one length with living ends: blocks, stars, combs and brushes.

**Which papers is “Controlled radical polymerisation: ATRP, RAFT and the architectures they build” based on?** Wang & Matyjaszewski, “Controlled/“living” radical polymerization. Atom transfer radical polymerization in the presence of transition-metal complexes”, J. Am. Chem. Soc. 1995 (doi:10.1021/ja00125a035); Kato, Kamigaito, Sawamoto & Higashimura, “Polymerization of methyl methacrylate with the carbon tetrachloride/dichlorotris(triphenylphosphine)ruthenium(II)/methylaluminum bis(2,6-di-tert-butylphenoxide) initiating system: possibility of living radical polymerization”, Macromolecules 1995 (doi:10.1021/ma00109a056); Chiefari et al., “Living free-radical polymerization by reversible addition–fragmentation chain transfer: the RAFT process”, Macromolecules 1998 (doi:10.1021/ma9804951); Moad, Rizzardo & Thang, “Living radical polymerization by the RAFT process”, Aust. J. Chem. 2005 (doi:10.1071/CH05072); Matyjaszewski, “Advanced materials by atom transfer radical polymerization”, Adv. Mater. 2018 (doi:10.1002/adma.201706441).

**Can I edit the “Controlled radical polymerisation: ATRP, RAFT and the architectures they build” template?** Yes. Open it in the LabCanvas editor: all 69 layers are editable, including 5 generated objects (structures, plots, equipment) with their own settings. Change the text, colours and layout, then export PNG, TIFF or PDF at the width and DPI the journal asks for.

**Do I need an account to use this template?** Not to view it here. To open and edit it, sign in to LabCanvas or create a free account (the free plan keeps up to 3 designs). Downloading the figure is part of LabCanvas Pro (US$19 a month or US$199 a year).
