# Electrochemical ammonia: nitrogen reduction versus nitrate reduction

> Why electrolysers make ammonia from nitrate far more easily than from nitrogen gas. N₂ reduction needs six electrons through a triple bond, hydrogen evolution wins even on the best metals, and a rigorous ¹⁵N₂ protocol found no ammonia on the most promising pure metals in water. Nitrate steps down a copper surface to ammonia in eight electrons; copper–nickel alloys, iron single atoms (no N–N coupling) and Ru-dispersed copper nanowires (1 A cm⁻² at 93% efficiency) steer it, and wastewater nitrate can be turned into solid ammonium chloride.

- Page: https://www.labcanvas.com/templates/graphical-abstracts/electrochemical-ammonia-nitrogen-reduction-versus-nitrate-reduction
- Open in the LabCanvas editor (LabCanvas account): https://www.labcanvas.com/editor.html?template=electrochemical-ammonia-nitrogen-vs-nitrate-reduction
- Updated: 2026-10-14
- Category: Graphical abstracts
- Method: Graphical abstract
- Starting materials: N₂ gas, or nitrate dissolved in water (wastewater, polluted groundwater)
- Product: Ammonia (as NH₃ solution or NH₄Cl)
- Key result: No NH₃ from pure metals in water under the ¹⁵N₂ protocol (Andersen et al. 2019); 6× Cu activity, +0.12 V (Wang et al. 2020); ~75% FE, 0.46 mmol h⁻¹ cm⁻² (Wu et al. 2021); 1 A cm⁻² at 93% FE, > 99% conversion (Chen et al. 2022)
- Figure: 1920 × 1080 px, 85 editable layers (4 generated objects with settings)

## Steps

1. **From N₂**: Hydrogen evolution competes even on the metals at the top of the volcano (Skúlason et al. 2012); with ¹⁵N₂ controls, the most promising pure metals in water made no ammonia (Andersen et al. 2019); many reports are false positives (Choi et al. 2020)
2. **From nitrate**: NO₃⁻ + 9H⁺ + 8e⁻ → NH₃ + 3H₂O, step by step on the surface: *NO₃ → *NO₂ → *NO → *N → *NH → *NH₂ → NH₃
3. **Tune the metal**: Cu₅₀Ni₅₀: half-wave potential up 0.12 V and 6× the activity of Cu (Wang et al. 2020)
4. **Isolate the sites**: Fe single atoms: ~75% Faradaic efficiency, no N–N coupling to N₂ (Wu et al. 2021)
5. **Go to industrial current**: Ru-dispersed Cu nanowires: 1 A cm⁻² at 93% Faradaic efficiency (Chen et al. 2022)
6. **Close the loop**: 2,000 ppm wastewater nitrate to < 50 ppm, > 99% converted; air stripping gives solid NH₄Cl (Chen et al. 2022)

## Uses

- Graphical abstracts on nitrate and nitrogen reduction to ammonia
- Talks on electrochemical ammonia and wastewater valorisation
- Teaching why N₂ reduction is hard

## References

1. Skúlason et al., “A theoretical evaluation of possible transition metal electro-catalysts for N₂ reduction”, Phys. Chem. Chem. Phys. 2012. https://doi.org/10.1039/C1CP22271F (primary)
2. Andersen et al., “A rigorous electrochemical ammonia synthesis protocol with quantitative isotope measurements”, Nature 2019. https://doi.org/10.1038/s41586-019-1260-x (primary)
3. Choi et al., “Identification and elimination of false positives in electrochemical nitrogen reduction studies”, Nat. Commun. 2020. https://doi.org/10.1038/s41467-020-19130-z (review)
4. Wang et al., “Enhanced nitrate-to-ammonia activity on copper–nickel alloys via tuning of intermediate adsorption”, J. Am. Chem. Soc. 2020. https://doi.org/10.1021/jacs.9b13347 (primary)
5. Wu et al., “Electrochemical ammonia synthesis via nitrate reduction on Fe single atom catalyst”, Nat. Commun. 2021. https://doi.org/10.1038/s41467-021-23115-x (primary)
6. Chen et al., “Efficient conversion of low-concentration nitrate sources into ammonia on a Ru-dispersed Cu nanowire electrocatalyst”, Nat. Nanotechnol. 2022. https://doi.org/10.1038/s41565-022-01121-4 (primary)

Credit: Drawn by LabCanvas after Skúlason et al., Phys. Chem. Chem. Phys. 2012 (doi:10.1039/C1CP22271F); Andersen et al., Nature 2019 (doi:10.1038/s41586-019-1260-x); Choi et al., Nat. Commun. 2020 (doi:10.1038/s41467-020-19130-z); Wang et al., J. Am. Chem. Soc. 2020 (doi:10.1021/jacs.9b13347); Wu et al., Nat. Commun. 2021 (doi:10.1038/s41467-021-23115-x); Chen et al., Nat. Nanotechnol. 2022 (doi:10.1038/s41565-022-01121-4). Surface and pathway drawing schematic.

## Questions

**What does the “Electrochemical ammonia: nitrogen reduction versus nitrate reduction” template show?** Why electrolysers make ammonia from nitrate far more easily than from nitrogen gas. N₂ reduction needs six electrons through a triple bond, hydrogen evolution wins even on the best metals, and a rigorous ¹⁵N₂ protocol found no ammonia on the most promising pure metals in water. Nitrate steps down a copper surface to ammonia in eight electrons; copper–nickel alloys, iron single atoms (no N–N coupling) and Ru-dispersed copper nanowires (1 A cm⁻² at 93% efficiency) steer it, and wastewater nitrate can be turned into solid ammonium chloride.

**What are the steps shown in “Electrochemical ammonia: nitrogen reduction versus nitrate reduction”?** 1. From N₂: Hydrogen evolution competes even on the metals at the top of the volcano (Skúlason et al. 2012); with ¹⁵N₂ controls, the most promising pure metals in water made no ammonia (Andersen et al. 2019); many reports are false positives (Choi et al. 2020). 2. From nitrate: NO₃⁻ + 9H⁺ + 8e⁻ → NH₃ + 3H₂O, step by step on the surface: *NO₃ → *NO₂ → *NO → *N → *NH → *NH₂ → NH₃. 3. Tune the metal: Cu₅₀Ni₅₀: half-wave potential up 0.12 V and 6× the activity of Cu (Wang et al. 2020). 4. Isolate the sites: Fe single atoms: ~75% Faradaic efficiency, no N–N coupling to N₂ (Wu et al. 2021). 5. Go to industrial current: Ru-dispersed Cu nanowires: 1 A cm⁻² at 93% Faradaic efficiency (Chen et al. 2022). 6. Close the loop: 2,000 ppm wastewater nitrate to < 50 ppm, > 99% converted; air stripping gives solid NH₄Cl (Chen et al. 2022).

**What are the starting materials and the product?** Starting materials: N₂ gas, or nitrate dissolved in water (wastewater, polluted groundwater). Product: Ammonia (as NH₃ solution or NH₄Cl).

**Which papers is “Electrochemical ammonia: nitrogen reduction versus nitrate reduction” based on?** Skúlason et al., “A theoretical evaluation of possible transition metal electro-catalysts for N₂ reduction”, Phys. Chem. Chem. Phys. 2012 (doi:10.1039/C1CP22271F); Andersen et al., “A rigorous electrochemical ammonia synthesis protocol with quantitative isotope measurements”, Nature 2019 (doi:10.1038/s41586-019-1260-x); Choi et al., “Identification and elimination of false positives in electrochemical nitrogen reduction studies”, Nat. Commun. 2020 (doi:10.1038/s41467-020-19130-z); Wang et al., “Enhanced nitrate-to-ammonia activity on copper–nickel alloys via tuning of intermediate adsorption”, J. Am. Chem. Soc. 2020 (doi:10.1021/jacs.9b13347); Wu et al., “Electrochemical ammonia synthesis via nitrate reduction on Fe single atom catalyst”, Nat. Commun. 2021 (doi:10.1038/s41467-021-23115-x); Chen et al., “Efficient conversion of low-concentration nitrate sources into ammonia on a Ru-dispersed Cu nanowire electrocatalyst”, Nat. Nanotechnol. 2022 (doi:10.1038/s41565-022-01121-4).

**Can I edit the “Electrochemical ammonia: nitrogen reduction versus nitrate reduction” template?** Yes. Open it in the LabCanvas editor: all 85 layers are editable, including 4 generated objects (structures, plots, equipment) with their own settings. Change the text, colours and layout, then export PNG, TIFF or PDF at the width and DPI the journal asks for.

**Do I need an account to use this template?** Not to view it here. To open and edit it, sign in to LabCanvas or create a free account (the free plan keeps up to 3 designs). Downloading the figure is part of LabCanvas Pro (US$19 a month or US$199 a year).
