# Graphitic carbon nitride photocatalysis: band ladder and Z-schemes

> An energy-ladder graphical abstract of g-C₃N₄: the bands of bulk carbon nitride drawn to scale against the water levels (a 2.7 eV gap, conduction band at −1.23 V vs NHE), the heptazine polymer in 3D, hydrogen from water with a sacrificial donor, carbon dots that let it split water with 16 % quantum efficiency at 420 nm, and Z-schemes with WO₃, BiVO₄ or TiO₂ that keep the strongest electron and the strongest hole.

- Page: https://www.labcanvas.com/templates/graphical-abstracts/graphitic-carbon-nitride-photocatalysis-band-ladder-z-schemes
- Open in the LabCanvas editor (LabCanvas account): https://www.labcanvas.com/editor.html?template=graphitic-carbon-nitride-band-structure-z-scheme
- Updated: 2026-10-14
- Category: Graphical abstracts
- Method: Graphical abstract
- Starting materials: Polymeric graphitic carbon nitride (heptazine units), made by heating nitrogen-rich precursors
- Product: Visible-light photocatalysts for hydrogen, overall water splitting and pollutant oxidation
- Key result: Eg 2.7 eV (Yuan et al. 2015); CB −1.23 V vs NHE (Ekande & Kumar 2021); QE 16 % at 420 nm, 2.0 % overall (Liu et al. 2015); H₂/O₂ 36/18 µmol h⁻¹ g⁻¹ (Martin et al. 2014)
- Figure: 1920 × 1080 px, 73 editable layers (5 generated objects with settings)

## Steps

1. **The ladder**: A 2.7 eV gap (Yuan et al. 2015); for bulk g-C₃N₄ the conduction band sits at −1.23 V vs NHE with a 2.73 eV gap, putting the valence band near +1.50 V (Ekande & Kumar 2021): above H⁺/H₂ and below O₂/H₂O
2. **Alone**: Polymeric carbon nitride makes H₂ from water under visible light with a sacrificial donor, and is chemically and thermally stable (Wang et al. 2009)
3. **With carbon dots**: Carbon-dot/C₃N₄ splits water by a two-electron pathway: 16 % quantum efficiency at 420 nm, 2.0 % overall (Liu et al. 2015)
4. **Z-scheme**: With BiVO₄ or WO₃ and a redox mediator, H₂ and O₂ evolve in a 2 : 1 ratio at 36 and 18 µmol h⁻¹ g⁻¹ over 14 h (Martin et al. 2014); a direct g-C₃N₄–TiO₂ Z-scheme oxidises formaldehyde 2.1× faster than P25 (Yu et al. 2013)

## Uses

- Graphical abstracts on carbon nitride and polymer photocatalysts
- Talks on Z-scheme and heterojunction design for solar fuels
- Teaching band edges against water redox levels

## References

1. Wang et al., “A metal-free polymeric photocatalyst for hydrogen production from water under visible light”, Nat. Mater. 2009. https://doi.org/10.1038/nmat2317 (method origin)
2. Yuan et al., “High-yield synthesis and optical properties of g-C3N4”, Nanoscale 2015. https://doi.org/10.1039/c5nr02905h (primary)
3. Ekande & Kumar, “Facile synthesis of graphitic carbon nitride from acetic acid pretreatment to activate persulfate in presence of blue light for photocatalytic removal of metronidazole”, Chemosphere 2021. https://doi.org/10.1016/j.chemosphere.2021.130171 (primary)
4. Liu et al., “Metal-free efficient photocatalyst for stable visible water splitting via a two-electron pathway”, Science 2015. https://doi.org/10.1126/science.aaa3145 (primary)
5. Martin et al., “Visible light-driven pure water splitting by a nature-inspired organic semiconductor-based system”, J. Am. Chem. Soc. 2014. https://doi.org/10.1021/ja506386e (primary)
6. Yu et al., “Enhanced photocatalytic performance of direct Z-scheme g-C3N4–TiO2 photocatalysts for the decomposition of formaldehyde in air”, Phys. Chem. Chem. Phys. 2013. https://doi.org/10.1039/c3cp53131g (primary)
7. Zhou, Yu & Jaroniec, “All-solid-state Z-scheme photocatalytic systems”, Adv. Mater. 2014. https://doi.org/10.1002/adma.201400288 (review)
8. Low et al., “Heterojunction photocatalysts”, Adv. Mater. 2017. https://doi.org/10.1002/adma.201601694 (review)
9. Ong et al., “Graphitic carbon nitride (g-C3N4)-based photocatalysts for artificial photosynthesis and environmental remediation: are we a step closer to achieving sustainability?”, Chem. Rev. 2016. https://doi.org/10.1021/acs.chemrev.6b00075 (review)

Credit: Drawn by LabCanvas after Wang et al., Nat. Mater. 2009 (doi:10.1038/nmat2317); Yuan et al., Nanoscale 2015 (doi:10.1039/c5nr02905h); Ekande & Kumar, Chemosphere 2021 (doi:10.1016/j.chemosphere.2021.130171); Liu et al., Science 2015 (doi:10.1126/science.aaa3145); Martin et al., J. Am. Chem. Soc. 2014 (doi:10.1021/ja506386e); Yu et al., Phys. Chem. Chem. Phys. 2013 (doi:10.1039/c3cp53131g); Zhou, Yu & Jaroniec, Adv. Mater. 2014 (doi:10.1002/adma.201400288). Ladder to scale for g-C₃N₄ only; Z-scheme schematic.

## Questions

**What does the “Graphitic carbon nitride photocatalysis: band ladder and Z-schemes” template show?** An energy-ladder graphical abstract of g-C₃N₄: the bands of bulk carbon nitride drawn to scale against the water levels (a 2.7 eV gap, conduction band at −1.23 V vs NHE), the heptazine polymer in 3D, hydrogen from water with a sacrificial donor, carbon dots that let it split water with 16 % quantum efficiency at 420 nm, and Z-schemes with WO₃, BiVO₄ or TiO₂ that keep the strongest electron and the strongest hole.

**What are the steps shown in “Graphitic carbon nitride photocatalysis: band ladder and Z-schemes”?** 1. The ladder: A 2.7 eV gap (Yuan et al. 2015); for bulk g-C₃N₄ the conduction band sits at −1.23 V vs NHE with a 2.73 eV gap, putting the valence band near +1.50 V (Ekande & Kumar 2021): above H⁺/H₂ and below O₂/H₂O. 2. Alone: Polymeric carbon nitride makes H₂ from water under visible light with a sacrificial donor, and is chemically and thermally stable (Wang et al. 2009). 3. With carbon dots: Carbon-dot/C₃N₄ splits water by a two-electron pathway: 16 % quantum efficiency at 420 nm, 2.0 % overall (Liu et al. 2015). 4. Z-scheme: With BiVO₄ or WO₃ and a redox mediator, H₂ and O₂ evolve in a 2 : 1 ratio at 36 and 18 µmol h⁻¹ g⁻¹ over 14 h (Martin et al. 2014); a direct g-C₃N₄–TiO₂ Z-scheme oxidises formaldehyde 2.1× faster than P25 (Yu et al. 2013).

**What are the starting materials and the product?** Starting materials: Polymeric graphitic carbon nitride (heptazine units), made by heating nitrogen-rich precursors. Product: Visible-light photocatalysts for hydrogen, overall water splitting and pollutant oxidation.

**Which papers is “Graphitic carbon nitride photocatalysis: band ladder and Z-schemes” based on?** Wang et al., “A metal-free polymeric photocatalyst for hydrogen production from water under visible light”, Nat. Mater. 2009 (doi:10.1038/nmat2317); Yuan et al., “High-yield synthesis and optical properties of g-C3N4”, Nanoscale 2015 (doi:10.1039/c5nr02905h); Ekande & Kumar, “Facile synthesis of graphitic carbon nitride from acetic acid pretreatment to activate persulfate in presence of blue light for photocatalytic removal of metronidazole”, Chemosphere 2021 (doi:10.1016/j.chemosphere.2021.130171); Liu et al., “Metal-free efficient photocatalyst for stable visible water splitting via a two-electron pathway”, Science 2015 (doi:10.1126/science.aaa3145); Martin et al., “Visible light-driven pure water splitting by a nature-inspired organic semiconductor-based system”, J. Am. Chem. Soc. 2014 (doi:10.1021/ja506386e); Yu et al., “Enhanced photocatalytic performance of direct Z-scheme g-C3N4–TiO2 photocatalysts for the decomposition of formaldehyde in air”, Phys. Chem. Chem. Phys. 2013 (doi:10.1039/c3cp53131g); Zhou, Yu & Jaroniec, “All-solid-state Z-scheme photocatalytic systems”, Adv. Mater. 2014 (doi:10.1002/adma.201400288); Low et al., “Heterojunction photocatalysts”, Adv. Mater. 2017 (doi:10.1002/adma.201601694); Ong et al., “Graphitic carbon nitride (g-C3N4)-based photocatalysts for artificial photosynthesis and environmental remediation: are we a step closer to achieving sustainability?”, Chem. Rev. 2016 (doi:10.1021/acs.chemrev.6b00075).

**Can I edit the “Graphitic carbon nitride photocatalysis: band ladder and Z-schemes” template?** Yes. Open it in the LabCanvas editor: all 73 layers are editable, including 5 generated objects (structures, plots, equipment) with their own settings. Change the text, colours and layout, then export PNG, TIFF or PDF at the width and DPI the journal asks for.

**Do I need an account to use this template?** Not to view it here. To open and edit it, sign in to LabCanvas or create a free account (the free plan keeps up to 3 designs). Downloading the figure is part of LabCanvas Pro (US$19 a month or US$199 a year).
