# Green chemistry metrics: atom economy, E-factor and process mass intensity of a route

> Three ways to weigh a synthesis: atom economy (the atoms on paper), the E-factor (the waste) and process mass intensity (everything that goes in, PMI = E + 1). Applied to real cases: the Boots and BHC ibuprofen routes on paper (40% against 77% atom economy, computed from the balanced equations), the E-factors of whole industries from oil refining (< 0.1) to pharmaceuticals (25 to > 100), and the sildenafil process brought from an E-factor of 105 to 7 by recovering its solvents.

- Page: https://www.labcanvas.com/templates/graphical-abstracts/green-chemistry-metrics-atom-economy-e-factor-process-mass-intensity-rou
- Open in the LabCanvas editor (LabCanvas account): https://www.labcanvas.com/editor.html?template=green-chemistry-metrics-atom-economy-e-factor-pmi
- Updated: 2026-10-14
- Category: Graphical abstracts
- Method: Graphical abstract
- Starting materials: A synthetic route: its balanced equations, and the masses of everything charged to the plant
- Product: Three numbers that compare routes: atom economy, E-factor and PMI
- Key result: AE 40% (Boots) vs 77% (BHC), computed; E-factor < 0.1 to > 100 by sector; sildenafil 105 → 7 → 4 (Tobiszewski et al. 2015); industry average 25–100 kg/kg (Dunn et al. 2004)
- Figure: 1920 × 1080 px, 108 editable layers (1 generated objects with settings)

## Steps

1. **Atom economy**: M(product) / ΣM(reactants): how many reactant atoms end up in the product (Trost 1991); on paper only, it ignores yield, solvents and purification (Hartyányi & Nagy 2026)
2. **E-factor**: kg waste per kg product, ideally 0 (Sheldon 2018): < 0.1 for oil refining, 25 to > 100 for pharmaceuticals (Tobiszewski et al. 2015)
3. **Process mass intensity**: kg of all inputs per kg product, PMI = E + 1 (Tobiszewski et al. 2015); the ACS GCI Pharmaceutical Roundtable’s key metric (Jimenez-Gonzalez et al. 2011)
4. **Ibuprofen on paper**: The six-step Boots route has an atom economy of 40%, the three-step catalytic BHC route 77% (computed from the balanced equations; routes after Hartyányi & Nagy 2026)
5. **Sildenafil in the plant**: E-factor 105 at discovery, 7 in production after solvent recovery, target 4 (Tobiszewski et al. 2015, after Dunn et al. 2004)

## Uses

- Graphical abstracts on green chemistry and process sustainability
- Teaching atom economy, E-factor and PMI with real numbers
- Talks on greener pharmaceutical manufacturing

## References

1. Trost, “The atom economy—a search for synthetic efficiency”, Science 1991. https://doi.org/10.1126/science.1962206 (method origin)
2. Sheldon, “Metrics of green chemistry and sustainability: past, present, and future”, ACS Sustainable Chem. Eng. 2018. https://doi.org/10.1021/acssuschemeng.7b03505 (review)
3. Sheldon, “The E Factor: fifteen years on”, Green Chem. 2007. https://doi.org/10.1039/b713736m (review)
4. Jimenez-Gonzalez, Ponder, Broxterman & Manley, “Using the right green yardstick: why process mass intensity is used in the pharmaceutical industry to drive more sustainable processes”, Org. Process Res. Dev. 2011. https://doi.org/10.1021/op200097d (primary)
5. Tobiszewski, Marć, Gałuszka & Namieśnik, “Green chemistry metrics with special reference to green analytical chemistry”, Molecules 2015. https://doi.org/10.3390/molecules200610928 (review)
6. Dunn, Galvin & Hettenbach, “The development of an environmentally benign synthesis of sildenafil citrate (Viagra™) and its assessment by Green Chemistry metrics”, Green Chem. 2004. https://doi.org/10.1039/b312329d (primary)
7. Constable, Curzons & Cunningham, “Metrics to ‘green’ chemistry—which are the best?”, Green Chem. 2002. https://doi.org/10.1039/B206169B (primary)
8. Hartyányi & Nagy, “Sustainable chemical technology: core concepts, key subfields, and assessment approaches”, BioDesign Res. 2026. https://doi.org/10.1016/j.bidere.2026.100105 (review)
9. Sytniczuk, Struzik, Grela & Kajetanowicz, “A tunable family of CAAC-ruthenium olefin metathesis catalysts modularly derived from a large-scale produced ibuprofen intermediate”, Chem. Sci. 2023. https://doi.org/10.1039/d3sc03849a (further reading)
10. Murphy, “Early industrial roots of green chemistry and the history of the BHC ibuprofen process invention and its quality connection”, Found. Chem. 2017. https://doi.org/10.1007/s10698-017-9300-9 (further reading)

Credit: Drawn by LabCanvas after Trost, Science 1991 (doi:10.1126/science.1962206); Sheldon, ACS Sustainable Chem. Eng. 2018 (doi:10.1021/acssuschemeng.7b03505); Jimenez-Gonzalez et al., Org. Process Res. Dev. 2011 (doi:10.1021/op200097d); Tobiszewski et al., Molecules 2015 (doi:10.3390/molecules200610928); Dunn et al., Green Chem. 2004 (doi:10.1039/b312329d); Hartyányi & Nagy, BioDesign Res. 2026 (doi:10.1016/j.bidere.2026.100105); Sytniczuk et al., Chem. Sci. 2023 (doi:10.1039/d3sc03849a). Atom economies computed from formula masses.

## Questions

**What does the “Green chemistry metrics: atom economy, E-factor and process mass intensity of a route” template show?** Three ways to weigh a synthesis: atom economy (the atoms on paper), the E-factor (the waste) and process mass intensity (everything that goes in, PMI = E + 1). Applied to real cases: the Boots and BHC ibuprofen routes on paper (40% against 77% atom economy, computed from the balanced equations), the E-factors of whole industries from oil refining (< 0.1) to pharmaceuticals (25 to > 100), and the sildenafil process brought from an E-factor of 105 to 7 by recovering its solvents.

**What are the steps shown in “Green chemistry metrics: atom economy, E-factor and process mass intensity of a route”?** 1. Atom economy: M(product) / ΣM(reactants): how many reactant atoms end up in the product (Trost 1991); on paper only, it ignores yield, solvents and purification (Hartyányi & Nagy 2026). 2. E-factor: kg waste per kg product, ideally 0 (Sheldon 2018): < 0.1 for oil refining, 25 to > 100 for pharmaceuticals (Tobiszewski et al. 2015). 3. Process mass intensity: kg of all inputs per kg product, PMI = E + 1 (Tobiszewski et al. 2015); the ACS GCI Pharmaceutical Roundtable’s key metric (Jimenez-Gonzalez et al. 2011). 4. Ibuprofen on paper: The six-step Boots route has an atom economy of 40%, the three-step catalytic BHC route 77% (computed from the balanced equations; routes after Hartyányi & Nagy 2026). 5. Sildenafil in the plant: E-factor 105 at discovery, 7 in production after solvent recovery, target 4 (Tobiszewski et al. 2015, after Dunn et al. 2004).

**What are the starting materials and the product?** Starting materials: A synthetic route: its balanced equations, and the masses of everything charged to the plant. Product: Three numbers that compare routes: atom economy, E-factor and PMI.

**Which papers is “Green chemistry metrics: atom economy, E-factor and process mass intensity of a route” based on?** Trost, “The atom economy—a search for synthetic efficiency”, Science 1991 (doi:10.1126/science.1962206); Sheldon, “Metrics of green chemistry and sustainability: past, present, and future”, ACS Sustainable Chem. Eng. 2018 (doi:10.1021/acssuschemeng.7b03505); Sheldon, “The E Factor: fifteen years on”, Green Chem. 2007 (doi:10.1039/b713736m); Jimenez-Gonzalez, Ponder, Broxterman & Manley, “Using the right green yardstick: why process mass intensity is used in the pharmaceutical industry to drive more sustainable processes”, Org. Process Res. Dev. 2011 (doi:10.1021/op200097d); Tobiszewski, Marć, Gałuszka & Namieśnik, “Green chemistry metrics with special reference to green analytical chemistry”, Molecules 2015 (doi:10.3390/molecules200610928); Dunn, Galvin & Hettenbach, “The development of an environmentally benign synthesis of sildenafil citrate (Viagra™) and its assessment by Green Chemistry metrics”, Green Chem. 2004 (doi:10.1039/b312329d); Constable, Curzons & Cunningham, “Metrics to ‘green’ chemistry—which are the best?”, Green Chem. 2002 (doi:10.1039/B206169B); Hartyányi & Nagy, “Sustainable chemical technology: core concepts, key subfields, and assessment approaches”, BioDesign Res. 2026 (doi:10.1016/j.bidere.2026.100105); Sytniczuk, Struzik, Grela & Kajetanowicz, “A tunable family of CAAC-ruthenium olefin metathesis catalysts modularly derived from a large-scale produced ibuprofen intermediate”, Chem. Sci. 2023 (doi:10.1039/d3sc03849a); Murphy, “Early industrial roots of green chemistry and the history of the BHC ibuprofen process invention and its quality connection”, Found. Chem. 2017 (doi:10.1007/s10698-017-9300-9).

**Can I edit the “Green chemistry metrics: atom economy, E-factor and process mass intensity of a route” template?** Yes. Open it in the LabCanvas editor: all 108 layers are editable, including 1 generated objects (structures, plots, equipment) with their own settings. Change the text, colours and layout, then export PNG, TIFF or PDF at the width and DPI the journal asks for.

**Do I need an account to use this template?** Not to view it here. To open and edit it, sign in to LabCanvas or create a free account (the free plan keeps up to 3 designs). Downloading the figure is part of LabCanvas Pro (US$19 a month or US$199 a year).
