# Hot-injection quantum dots: from one burst of nuclei to bright core/shell dots

> A graphical abstract of the hot-injection synthesis read as a clock: TOP:Se shot into CdO in TOPO at 370 °C starts one burst of nucleation (the LaMer picture), the nuclei then only grow, and the moment the flask is cooled sets the size and colour (≈2–2.5 nm at once, 3 nm after 3 min, 4 nm after 5 min). A ZnS shell lifts the quantum yield to 50%, and cadmium-free InP/ZnSe/ZnS dots reach ~100% and 21.4%-efficient LEDs.

- Page: https://www.labcanvas.com/templates/graphical-abstracts/hot-injection-quantum-dots-burst-nuclei-bright-core-shell-dots
- Open in the LabCanvas editor (LabCanvas account): https://www.labcanvas.com/editor.html?template=hot-injection-quantum-dots-burst-nucleation-to-core-shell
- Updated: 2026-10-14
- Category: Graphical abstracts
- Method: Graphical abstract
- Starting materials: CdO with ODPA in TOPO (cadmium phosphonate), TOP:Se injected at 370 °C; shells from zinc and sulfur or selenium precursors
- Product: Nearly monodisperse CdSe dots whose size is set by the growth time, and CdSe/ZnS and InP/ZnSe/ZnS core/shell dots
- Key result: ≈2–2.5, 3 and 4 nm CdSe after 0, 3 and 5 min at 370 °C (Manthiram et al. 2013); 50% QY CdSe/ZnS (Hines & Guyot-Sionnest 1996); 30–50% QY, fwhm ≤ 40 nm (Dabbousi et al. 1997); ~100% QY InP/ZnSe/ZnS, 21.4% EQE (Won et al. 2019)
- Figure: 1920 × 1080 px, 86 editable layers (7 generated objects with settings)

## Steps

1. **Inject**: TOP:Se shot through a 14 G needle into the degassed cadmium solution at 370 °C: a sharp nucleation event that narrows the size distribution (Manthiram et al. 2013)
2. **Burst, then grow**: Burst nucleation and diffusion-controlled growth set the size distribution (Kwon & Hyeon 2011), the LaMer picture (LaMer & Dinegar 1950)
3. **Stop the clock**: Cooled at once ≈2–2.5 nm, after 3 min ≈3 nm, after 5 min ≈4 nm, sized from the first exciton (Manthiram et al. 2013; Yu et al. 2003)
4. **Add a shell**: A ZnS cap 6 ± 3 Å thick on 27–30 Å CdSe removes surface traps: 50% quantum yield (Hines & Guyot-Sionnest 1996); 23–55 Å cores emit blue to red, fwhm ≤ 40 nm (Dabbousi et al. 1997)
5. **Cadmium-free**: InP/ZnSe/ZnS with an HF etch and ZnSe grown at 340 °C: ~100% quantum yield, LEDs with 21.4% EQE (Won et al. 2019)

## Uses

- Graphical abstracts on colloidal quantum-dot synthesis
- Teaching nucleation, growth and size focusing
- Talks on core/shell and cadmium-free quantum dots for displays

## References

1. Murray, Norris & Bawendi, “Synthesis and characterization of nearly monodisperse CdE (E = sulfur, selenium, tellurium) semiconductor nanocrystallites”, J. Am. Chem. Soc. 1993. https://doi.org/10.1021/ja00072a025 (method origin)
2. LaMer & Dinegar, “Theory, production and mechanism of formation of monodispersed hydrosols”, J. Am. Chem. Soc. 1950. https://doi.org/10.1021/ja01167a001 (method origin)
3. Peng, Wickham & Alivisatos, “Kinetics of II-VI and III-V colloidal semiconductor nanocrystal growth: “focusing” of size distributions”, J. Am. Chem. Soc. 1998. https://doi.org/10.1021/ja9805425 (primary)
4. Manthiram, Beberwyck, Talapin & Alivisatos, “Seeded synthesis of CdSe/CdS rod and tetrapod nanocrystals”, J. Vis. Exp. 2013. https://doi.org/10.3791/50731 (primary)
5. Yu, Qu, Guo & Peng, “Experimental determination of the extinction coefficient of CdTe, CdSe, and CdS nanocrystals”, Chem. Mater. 2003. https://doi.org/10.1021/cm034081k (primary)
6. Kwon & Hyeon, “Formation mechanisms of uniform nanocrystals via hot-injection and heat-up methods”, Small 2011. https://doi.org/10.1002/smll.201002022 (review)
7. Hines & Guyot-Sionnest, “Synthesis and characterization of strongly luminescing ZnS-capped CdSe nanocrystals”, J. Phys. Chem. 1996. https://doi.org/10.1021/jp9530562 (primary)
8. Dabbousi et al., “(CdSe)ZnS core−shell quantum dots: synthesis and characterization of a size series of highly luminescent nanocrystallites”, J. Phys. Chem. B 1997. https://doi.org/10.1021/jp971091y (primary)
9. Won et al., “Highly efficient and stable InP/ZnSe/ZnS quantum dot light-emitting diodes”, Nature 2019. https://doi.org/10.1038/s41586-019-1771-5 (primary)

Credit: Drawn by LabCanvas after Murray, Norris & Bawendi, J. Am. Chem. Soc. 1993 (doi:10.1021/ja00072a025); Manthiram et al., J. Vis. Exp. 2013 (doi:10.3791/50731); Yu et al., Chem. Mater. 2003 (doi:10.1021/cm034081k); Kwon & Hyeon, Small 2011 (doi:10.1002/smll.201002022); Hines & Guyot-Sionnest, J. Phys. Chem. 1996 (doi:10.1021/jp9530562); Dabbousi et al., J. Phys. Chem. B 1997 (doi:10.1021/jp971091y); Won et al., Nature 2019 (doi:10.1038/s41586-019-1771-5). LaMer curve schematic.

## Questions

**What does the “Hot-injection quantum dots: from one burst of nuclei to bright core/shell dots” template show?** A graphical abstract of the hot-injection synthesis read as a clock: TOP:Se shot into CdO in TOPO at 370 °C starts one burst of nucleation (the LaMer picture), the nuclei then only grow, and the moment the flask is cooled sets the size and colour (≈2–2.5 nm at once, 3 nm after 3 min, 4 nm after 5 min). A ZnS shell lifts the quantum yield to 50%, and cadmium-free InP/ZnSe/ZnS dots reach ~100% and 21.4%-efficient LEDs.

**What are the steps shown in “Hot-injection quantum dots: from one burst of nuclei to bright core/shell dots”?** 1. Inject: TOP:Se shot through a 14 G needle into the degassed cadmium solution at 370 °C: a sharp nucleation event that narrows the size distribution (Manthiram et al. 2013). 2. Burst, then grow: Burst nucleation and diffusion-controlled growth set the size distribution (Kwon & Hyeon 2011), the LaMer picture (LaMer & Dinegar 1950). 3. Stop the clock: Cooled at once ≈2–2.5 nm, after 3 min ≈3 nm, after 5 min ≈4 nm, sized from the first exciton (Manthiram et al. 2013; Yu et al. 2003). 4. Add a shell: A ZnS cap 6 ± 3 Å thick on 27–30 Å CdSe removes surface traps: 50% quantum yield (Hines & Guyot-Sionnest 1996); 23–55 Å cores emit blue to red, fwhm ≤ 40 nm (Dabbousi et al. 1997). 5. Cadmium-free: InP/ZnSe/ZnS with an HF etch and ZnSe grown at 340 °C: ~100% quantum yield, LEDs with 21.4% EQE (Won et al. 2019).

**What are the starting materials and the product?** Starting materials: CdO with ODPA in TOPO (cadmium phosphonate), TOP:Se injected at 370 °C; shells from zinc and sulfur or selenium precursors. Product: Nearly monodisperse CdSe dots whose size is set by the growth time, and CdSe/ZnS and InP/ZnSe/ZnS core/shell dots.

**Which papers is “Hot-injection quantum dots: from one burst of nuclei to bright core/shell dots” based on?** Murray, Norris & Bawendi, “Synthesis and characterization of nearly monodisperse CdE (E = sulfur, selenium, tellurium) semiconductor nanocrystallites”, J. Am. Chem. Soc. 1993 (doi:10.1021/ja00072a025); LaMer & Dinegar, “Theory, production and mechanism of formation of monodispersed hydrosols”, J. Am. Chem. Soc. 1950 (doi:10.1021/ja01167a001); Peng, Wickham & Alivisatos, “Kinetics of II-VI and III-V colloidal semiconductor nanocrystal growth: “focusing” of size distributions”, J. Am. Chem. Soc. 1998 (doi:10.1021/ja9805425); Manthiram, Beberwyck, Talapin & Alivisatos, “Seeded synthesis of CdSe/CdS rod and tetrapod nanocrystals”, J. Vis. Exp. 2013 (doi:10.3791/50731); Yu, Qu, Guo & Peng, “Experimental determination of the extinction coefficient of CdTe, CdSe, and CdS nanocrystals”, Chem. Mater. 2003 (doi:10.1021/cm034081k); Kwon & Hyeon, “Formation mechanisms of uniform nanocrystals via hot-injection and heat-up methods”, Small 2011 (doi:10.1002/smll.201002022); Hines & Guyot-Sionnest, “Synthesis and characterization of strongly luminescing ZnS-capped CdSe nanocrystals”, J. Phys. Chem. 1996 (doi:10.1021/jp9530562); Dabbousi et al., “(CdSe)ZnS core−shell quantum dots: synthesis and characterization of a size series of highly luminescent nanocrystallites”, J. Phys. Chem. B 1997 (doi:10.1021/jp971091y); Won et al., “Highly efficient and stable InP/ZnSe/ZnS quantum dot light-emitting diodes”, Nature 2019 (doi:10.1038/s41586-019-1771-5).

**Can I edit the “Hot-injection quantum dots: from one burst of nuclei to bright core/shell dots” template?** Yes. Open it in the LabCanvas editor: all 86 layers are editable, including 7 generated objects (structures, plots, equipment) with their own settings. Change the text, colours and layout, then export PNG, TIFF or PDF at the width and DPI the journal asks for.

**Do I need an account to use this template?** Not to view it here. To open and edit it, sign in to LabCanvas or create a free account (the free plan keeps up to 3 designs). Downloading the figure is part of LabCanvas Pro (US$19 a month or US$199 a year).
