# Hydrogels for tissue engineering: stiffness, relaxation, degradation and printing

> A hydrogel stands in for the extracellular matrix, and four of its properties steer the cells inside. Stiffness: soft gels push stem cells toward neurons, stiffer ones toward muscle, rigid ones toward bone. Stress relaxation: faster-relaxing gels give more spreading and a bone-like matrix. Degradability with adhesion sites: MMP-cleavable gels let cells invade and remodel a skull defect into bone in four weeks. Printability: cell-laden inks build vascularised tissues more than 1 cm thick, perfused for over six weeks.

- Page: https://www.labcanvas.com/templates/graphical-abstracts/hydrogels-tissue-engineering-stiffness-relaxation-degradation-printing
- Open in the LabCanvas editor (LabCanvas account): https://www.labcanvas.com/editor.html?template=hydrogels-for-tissue-engineering-four-dials
- Updated: 2026-10-14
- Category: Graphical abstracts
- Method: Graphical abstract
- Starting materials: Cells and a hydrogel precursor (a natural or synthetic polymer with cross-linkable groups)
- Product: A cell-laden gel that guides the cells into a tissue
- Key result: Lineage by elasticity: 0.1–1, 8–17, 25–40 kPa (Engler et al. 2006); bone-like matrix at 17 kPa in fast-relaxing gels (Chaudhuri et al. 2016); bone in 4 weeks with 5 µg BMP-2 (Lutolf et al. 2003); > 1 cm, > 6 weeks (Kolesky et al. 2016)
- Figure: 1920 × 1080 px, 98 editable layers (4 generated objects with settings)

## Steps

1. **Stiffness**: MSCs on brain-like soft matrices become neurogenic, on muscle-like ones myogenic, on rigid bone-like ones osteogenic (Engler et al. 2006)
2. **Stress relaxation**: Faster-relaxing gels enhance spreading, proliferation and osteogenesis; a bone-like, mineralised matrix at 17 kPa (Chaudhuri et al. 2016)
3. **Degradation and adhesion**: Integrin-binding sites plus MMP-cleavable cross-links let cells invade; with 5 µg BMP-2, rat cranial defects were remodelled into bone in 4 weeks (Lutolf et al. 2003)
4. **Printing**: GelMA crosslinks under light and can be bioprinted (Yue et al. 2015); bioprinted vascularised tissues exceeded 1 cm and were perfused > 6 weeks (Kolesky et al. 2016)

## Uses

- Graphical abstracts on hydrogels, biomaterials and tissue engineering
- Teaching mechanobiology and stem-cell fate
- Talks on bioprinting

## References

1. Engler, Sen, Sweeney & Discher, “Matrix elasticity directs stem cell lineage specification”, Cell 2006. https://doi.org/10.1016/j.cell.2006.06.044 (primary)
2. Chaudhuri et al., “Hydrogels with tunable stress relaxation regulate stem cell fate and activity”, Nat. Mater. 2016. https://doi.org/10.1038/nmat4489 (primary)
3. Lutolf et al., “Synthetic matrix metalloproteinase-sensitive hydrogels for the conduction of tissue regeneration: engineering cell-invasion characteristics”, Proc. Natl. Acad. Sci. USA 2003. https://doi.org/10.1073/pnas.0737381100 (primary)
4. Yue et al., “Synthesis, properties, and biomedical applications of gelatin methacryloyl (GelMA) hydrogels”, Biomaterials 2015. https://doi.org/10.1016/j.biomaterials.2015.08.045 (review)
5. Murphy & Atala, “3D bioprinting of tissues and organs”, Nat. Biotechnol. 2014. https://doi.org/10.1038/nbt.2958 (review)
6. Kolesky, Homan, Skylar-Scott & Lewis, “Three-dimensional bioprinting of thick vascularized tissues”, Proc. Natl. Acad. Sci. USA 2016. https://doi.org/10.1073/pnas.1521342113 (primary)

Credit: Drawn by LabCanvas after Engler et al., Cell 2006 (doi:10.1016/j.cell.2006.06.044); Chaudhuri et al., Nat. Mater. 2016 (doi:10.1038/nmat4489); Lutolf et al., PNAS 2003 (doi:10.1073/pnas.0737381100); Yue et al., Biomaterials 2015 (doi:10.1016/j.biomaterials.2015.08.045); Murphy & Atala, Nat. Biotechnol. 2014 (doi:10.1038/nbt.2958); Kolesky et al., PNAS 2016 (doi:10.1073/pnas.1521342113). Network, cells and printer schematic.

## Questions

**What does the “Hydrogels for tissue engineering: stiffness, relaxation, degradation and printing” template show?** A hydrogel stands in for the extracellular matrix, and four of its properties steer the cells inside. Stiffness: soft gels push stem cells toward neurons, stiffer ones toward muscle, rigid ones toward bone. Stress relaxation: faster-relaxing gels give more spreading and a bone-like matrix. Degradability with adhesion sites: MMP-cleavable gels let cells invade and remodel a skull defect into bone in four weeks. Printability: cell-laden inks build vascularised tissues more than 1 cm thick, perfused for over six weeks.

**What are the steps shown in “Hydrogels for tissue engineering: stiffness, relaxation, degradation and printing”?** 1. Stiffness: MSCs on brain-like soft matrices become neurogenic, on muscle-like ones myogenic, on rigid bone-like ones osteogenic (Engler et al. 2006). 2. Stress relaxation: Faster-relaxing gels enhance spreading, proliferation and osteogenesis; a bone-like, mineralised matrix at 17 kPa (Chaudhuri et al. 2016). 3. Degradation and adhesion: Integrin-binding sites plus MMP-cleavable cross-links let cells invade; with 5 µg BMP-2, rat cranial defects were remodelled into bone in 4 weeks (Lutolf et al. 2003). 4. Printing: GelMA crosslinks under light and can be bioprinted (Yue et al. 2015); bioprinted vascularised tissues exceeded 1 cm and were perfused > 6 weeks (Kolesky et al. 2016).

**What are the starting materials and the product?** Starting materials: Cells and a hydrogel precursor (a natural or synthetic polymer with cross-linkable groups). Product: A cell-laden gel that guides the cells into a tissue.

**Which papers is “Hydrogels for tissue engineering: stiffness, relaxation, degradation and printing” based on?** Engler, Sen, Sweeney & Discher, “Matrix elasticity directs stem cell lineage specification”, Cell 2006 (doi:10.1016/j.cell.2006.06.044); Chaudhuri et al., “Hydrogels with tunable stress relaxation regulate stem cell fate and activity”, Nat. Mater. 2016 (doi:10.1038/nmat4489); Lutolf et al., “Synthetic matrix metalloproteinase-sensitive hydrogels for the conduction of tissue regeneration: engineering cell-invasion characteristics”, Proc. Natl. Acad. Sci. USA 2003 (doi:10.1073/pnas.0737381100); Yue et al., “Synthesis, properties, and biomedical applications of gelatin methacryloyl (GelMA) hydrogels”, Biomaterials 2015 (doi:10.1016/j.biomaterials.2015.08.045); Murphy & Atala, “3D bioprinting of tissues and organs”, Nat. Biotechnol. 2014 (doi:10.1038/nbt.2958); Kolesky, Homan, Skylar-Scott & Lewis, “Three-dimensional bioprinting of thick vascularized tissues”, Proc. Natl. Acad. Sci. USA 2016 (doi:10.1073/pnas.1521342113).

**Can I edit the “Hydrogels for tissue engineering: stiffness, relaxation, degradation and printing” template?** Yes. Open it in the LabCanvas editor: all 98 layers are editable, including 4 generated objects (structures, plots, equipment) with their own settings. Change the text, colours and layout, then export PNG, TIFF or PDF at the width and DPI the journal asks for.

**Do I need an account to use this template?** Not to view it here. To open and edit it, sign in to LabCanvas or create a free account (the free plan keeps up to 3 designs). Downloading the figure is part of LabCanvas Pro (US$19 a month or US$199 a year).
