# Mechanochemistry: one solvent-free ball mill, three materials (MOFs, COFs, cocrystals)

> A ball-mill jar and no solvent bottle: ZnO and 2-methylimidazole become the framework ZIF-8, two COF monomers become an acid- and water-stable covalent organic framework, and caffeine with oxalic acid becomes a cocrystal that no longer takes up water. A drop of liquid and a pinch of salt turn an incomplete 90-minute milling into complete conversion in eight minutes, and extruders make the same MOFs at kilograms per hour.

- Page: https://www.labcanvas.com/templates/graphical-abstracts/mechanochemistry-solvent-free-ball-mill-three-materials-mofs-cofs-cocrys
- Open in the LabCanvas editor (LabCanvas account): https://www.labcanvas.com/editor.html?template=mechanochemistry-solvent-free-ball-mill-mofs-cofs-cocrystals
- Updated: 2026-10-14
- Category: Graphical abstracts
- Method: Graphical abstract
- Starting materials: Solid reactants with no or a catalytic amount of liquid (and salt): ZnO + 2-methylimidazole; 1,3,5-triformylphloroglucinol + p-phenylenediamine; caffeine + oxalic acid
- Product: ZIF-8, β-ketoenamine COFs (TpPa-1, TpPa-2, TpBD) and caffeine cocrystals, made without bulk solvent
- Key result: ILAG ZIF-8 in 8 min vs > 90 min neat (Mottillo & Friščić 2017); COFs stable in 9 N HCl (Biswal et al. 2013); 4 kg h⁻¹ ZIF-8, STY 144 × 10³ kg m⁻³ d⁻¹ (Crawford et al. 2015)
- Figure: 1920 × 1080 px, 67 editable layers (9 generated objects with settings)

## Steps

1. **Grind, do not dissolve**: Solid reactants ground together with no or minimal solvent (James et al. 2012); in situ X-ray diffraction shows rates comparable to or faster than in solution (Friščić et al. 2013)
2. **A drop of liquid, a pinch of salt**: ZnO + 2-methylimidazole: neat milling incomplete after 90 min, LAG incomplete at 30 min, ILAG complete in 8 min (Mottillo & Friščić 2017; Friščić et al. 2010)
3. **COFs at room temperature**: TpPa-1, TpPa-2 and TpBD by solvent-free grinding, stable in boiling water and 9 N HCl (Biswal et al. 2013)
4. **Cocrystals**: Caffeine with dicarboxylic acids by neat or solvent-drop grinding; the oxalic acid cocrystal is stable to humidity for weeks (Trask et al. 2005)
5. **Scale by extrusion**: HKUST-1 and ZIF-8 by twin-screw extrusion at up to 1 kg h⁻¹, ZIF-8 at 4 kg h⁻¹ by single screw; space-time yields up to 144 × 10³ kg m⁻³ d⁻¹ (Crawford et al. 2015)

## Uses

- Graphical abstracts on mechanochemistry and solvent-free synthesis
- Talks on green routes to MOFs, COFs and pharmaceutical cocrystals
- Teaching LAG, ILAG and reactive extrusion

## References

1. James et al., “Mechanochemistry: opportunities for new and cleaner synthesis”, Chem. Soc. Rev. 2012. https://doi.org/10.1039/C1CS15171A (review)
2. Friščić et al., “Real-time and in situ monitoring of mechanochemical milling reactions”, Nat. Chem. 2013. https://doi.org/10.1038/nchem.1505 (primary)
3. Mottillo & Friščić, “Advances in solid-state transformations of coordination bonds: from the ball mill to the aging chamber”, Molecules 2017. https://doi.org/10.3390/molecules22010144 (review)
4. Friščić et al., “Ion- and liquid-assisted grinding: improved mechanochemical synthesis of metal–organic frameworks reveals salt inclusion and anion templating”, Angew. Chem. Int. Ed. 2010. https://doi.org/10.1002/anie.200906583 (primary)
5. Biswal et al., “Mechanochemical synthesis of chemically stable isoreticular covalent organic frameworks”, J. Am. Chem. Soc. 2013. https://doi.org/10.1021/ja4017842 (primary)
6. Trask, Motherwell & Jones, “Pharmaceutical cocrystallization: engineering a remedy for caffeine hydration”, Cryst. Growth Des. 2005. https://doi.org/10.1021/cg0496540 (primary)
7. Trask, Motherwell & Jones, “Solvent-drop grinding: green polymorph control of cocrystallisation”, Chem. Commun. 2004. https://doi.org/10.1039/b400978a (primary)
8. Crawford et al., “Synthesis by extrusion: continuous, large-scale preparation of MOFs using little or no solvent”, Chem. Sci. 2015. https://doi.org/10.1039/C4SC03217A (primary)
9. Gomollón-Bel, “Ten chemical innovations that will change our world”, Chem. Int. 2019. https://doi.org/10.1515/ci-2019-0203 (further reading)

Credit: Drawn by LabCanvas after James et al., Chem. Soc. Rev. 2012 (doi:10.1039/C1CS15171A); Friščić et al., Nat. Chem. 2013 (doi:10.1038/nchem.1505); Mottillo & Friščić, Molecules 2017 (doi:10.3390/molecules22010144); Friščić et al., Angew. Chem. Int. Ed. 2010 (doi:10.1002/anie.200906583); Biswal et al., J. Am. Chem. Soc. 2013 (doi:10.1021/ja4017842); Trask et al., Cryst. Growth Des. 2005 (doi:10.1021/cg0496540); Crawford et al., Chem. Sci. 2015 (doi:10.1039/C4SC03217A). Progress bars schematic.

## Questions

**What does the “Mechanochemistry: one solvent-free ball mill, three materials (MOFs, COFs, cocrystals)” template show?** A ball-mill jar and no solvent bottle: ZnO and 2-methylimidazole become the framework ZIF-8, two COF monomers become an acid- and water-stable covalent organic framework, and caffeine with oxalic acid becomes a cocrystal that no longer takes up water. A drop of liquid and a pinch of salt turn an incomplete 90-minute milling into complete conversion in eight minutes, and extruders make the same MOFs at kilograms per hour.

**What are the steps shown in “Mechanochemistry: one solvent-free ball mill, three materials (MOFs, COFs, cocrystals)”?** 1. Grind, do not dissolve: Solid reactants ground together with no or minimal solvent (James et al. 2012); in situ X-ray diffraction shows rates comparable to or faster than in solution (Friščić et al. 2013). 2. A drop of liquid, a pinch of salt: ZnO + 2-methylimidazole: neat milling incomplete after 90 min, LAG incomplete at 30 min, ILAG complete in 8 min (Mottillo & Friščić 2017; Friščić et al. 2010). 3. COFs at room temperature: TpPa-1, TpPa-2 and TpBD by solvent-free grinding, stable in boiling water and 9 N HCl (Biswal et al. 2013). 4. Cocrystals: Caffeine with dicarboxylic acids by neat or solvent-drop grinding; the oxalic acid cocrystal is stable to humidity for weeks (Trask et al. 2005). 5. Scale by extrusion: HKUST-1 and ZIF-8 by twin-screw extrusion at up to 1 kg h⁻¹, ZIF-8 at 4 kg h⁻¹ by single screw; space-time yields up to 144 × 10³ kg m⁻³ d⁻¹ (Crawford et al. 2015).

**What are the starting materials and the product?** Starting materials: Solid reactants with no or a catalytic amount of liquid (and salt): ZnO + 2-methylimidazole; 1,3,5-triformylphloroglucinol + p-phenylenediamine; caffeine + oxalic acid. Product: ZIF-8, β-ketoenamine COFs (TpPa-1, TpPa-2, TpBD) and caffeine cocrystals, made without bulk solvent.

**Which papers is “Mechanochemistry: one solvent-free ball mill, three materials (MOFs, COFs, cocrystals)” based on?** James et al., “Mechanochemistry: opportunities for new and cleaner synthesis”, Chem. Soc. Rev. 2012 (doi:10.1039/C1CS15171A); Friščić et al., “Real-time and in situ monitoring of mechanochemical milling reactions”, Nat. Chem. 2013 (doi:10.1038/nchem.1505); Mottillo & Friščić, “Advances in solid-state transformations of coordination bonds: from the ball mill to the aging chamber”, Molecules 2017 (doi:10.3390/molecules22010144); Friščić et al., “Ion- and liquid-assisted grinding: improved mechanochemical synthesis of metal–organic frameworks reveals salt inclusion and anion templating”, Angew. Chem. Int. Ed. 2010 (doi:10.1002/anie.200906583); Biswal et al., “Mechanochemical synthesis of chemically stable isoreticular covalent organic frameworks”, J. Am. Chem. Soc. 2013 (doi:10.1021/ja4017842); Trask, Motherwell & Jones, “Pharmaceutical cocrystallization: engineering a remedy for caffeine hydration”, Cryst. Growth Des. 2005 (doi:10.1021/cg0496540); Trask, Motherwell & Jones, “Solvent-drop grinding: green polymorph control of cocrystallisation”, Chem. Commun. 2004 (doi:10.1039/b400978a); Crawford et al., “Synthesis by extrusion: continuous, large-scale preparation of MOFs using little or no solvent”, Chem. Sci. 2015 (doi:10.1039/C4SC03217A); Gomollón-Bel, “Ten chemical innovations that will change our world”, Chem. Int. 2019 (doi:10.1515/ci-2019-0203).

**Can I edit the “Mechanochemistry: one solvent-free ball mill, three materials (MOFs, COFs, cocrystals)” template?** Yes. Open it in the LabCanvas editor: all 67 layers are editable, including 9 generated objects (structures, plots, equipment) with their own settings. Change the text, colours and layout, then export PNG, TIFF or PDF at the width and DPI the journal asks for.

**Do I need an account to use this template?** Not to view it here. To open and edit it, sign in to LabCanvas or create a free account (the free plan keeps up to 3 designs). Downloading the figure is part of LabCanvas Pro (US$19 a month or US$199 a year).
