# Mesoporous silica with gatekeepers: capped pores for controlled release

> A mesoporous silica nanoparticle is a pill bottle with thousands of 2–4 nm channels; the trick is the lid. Cadmium sulfide caps on disulfide tethers come off with a reducing agent, gold caps let plant cells receive a gene and its inducer, cyclodextrin valves open in acid, an azobenzene valve opens under near-UV light and reseals in the dark, and a lipid bilayer turns the particle into a protocell that targets cancer cells 10 000 times more tightly.

- Page: https://www.labcanvas.com/templates/graphical-abstracts/mesoporous-silica-gatekeepers-capped-pores-controlled-release
- Open in the LabCanvas editor (LabCanvas account): https://www.labcanvas.com/editor.html?template=mesoporous-silica-gatekeepers-controlled-release
- Updated: 2026-10-14
- Category: Graphical abstracts
- Method: Graphical abstract
- Starting materials: MCM-41-type silica nanoparticles with ordered 2–4 nm channels, and caps: CdS or gold nanocrystals, cyclodextrin rings on stalks, lipid bilayers
- Product: Silica carriers that hold their cargo until a chosen key opens the pores
- Key result: Pores 2–4 nm (Mal et al. 2003), 3 nm (Torney et al. 2007); protocell affinity 10 000× and potency 10⁶× (Ashley et al. 2011)
- Figure: 1920 × 1080 px, 62 editable layers (3 generated objects with settings)

## Steps

1. **The bottle**: Ordered mesoporous silica by liquid-crystal templating (Kresge et al. 1992), proposed as a drug carrier (Vallet-Regí et al. 2001); channels 2–4 nm across (Mal et al. 2003)
2. **Nanocrystal caps**: CdS caps on disulfide tethers block vancomycin and ATP in the channels until DTT or mercaptoethanol cuts them (Lai et al. 2003)
3. **Gold caps**: 3 nm pores holding a gene and its chemical inducer, capped with gold particles; uncapping triggered gene expression in plant cells (Torney et al. 2007)
4. **Molecular valves**: α-Cyclodextrin on an anilino stalk opens when protonated at low pH (Du et al. 2009); an azobenzene valve opens under near-UV light and reseals as it relaxes (Tarn et al. 2014)
5. **A membrane lid**: Protocells: a lipid bilayer on the porous core; with a targeting peptide 10 000-fold higher affinity for liver cancer cells, 10⁶-fold more potent than liposomes (Ashley et al. 2011)

## Uses

- Graphical abstracts on mesoporous silica carriers and gatekeepers
- Reviews of mechanized nanoparticles and nanovalves
- Teaching zero-premature-release design

## References

1. Kresge et al., “Ordered mesoporous molecular sieves synthesized by a liquid-crystal template mechanism”, Nature 1992. https://doi.org/10.1038/359710a0 (method origin)
2. Vallet-Regí et al., “A new property of MCM-41: drug delivery system”, Chem. Mater. 2001. https://doi.org/10.1021/cm0011559 (primary)
3. Mal, Fujiwara & Tanaka, “Photocontrolled reversible release of guest molecules from coumarin-modified mesoporous silica”, Nature 2003. https://doi.org/10.1038/nature01362 (primary)
4. Lai et al., “A mesoporous silica nanosphere-based carrier system with chemically removable CdS nanoparticle caps for stimuli-responsive controlled release of neurotransmitters and drug molecules”, J. Am. Chem. Soc. 2003. https://doi.org/10.1021/ja028650l (primary)
5. Cheng et al., “Glutathione-responsive nano-vehicles as a promising platform for targeted intracellular drug and gene delivery”, J. Control. Release 2011. https://doi.org/10.1016/j.jconrel.2011.01.030 (review)
6. Torney et al., “Mesoporous silica nanoparticles deliver DNA and chemicals into plants”, Nat. Nanotechnol. 2007. https://doi.org/10.1038/nnano.2007.108 (primary)
7. Du et al., “Controlled-access hollow mechanized silica nanocontainers”, J. Am. Chem. Soc. 2009. https://doi.org/10.1021/ja904982j (primary)
8. Tarn et al., “A reversible light-operated nanovalve on mesoporous silica nanoparticles”, Nanoscale 2014. https://doi.org/10.1039/c3nr06049g (primary)
9. Ashley et al., “The targeted delivery of multicomponent cargos to cancer cells by nanoporous particle-supported lipid bilayers”, Nat. Mater. 2011. https://doi.org/10.1038/nmat2992 (primary)

Credit: Drawn by LabCanvas after Kresge et al., Nature 1992 (doi:10.1038/359710a0); Vallet-Regí et al., Chem. Mater. 2001 (doi:10.1021/cm0011559); Mal et al., Nature 2003 (doi:10.1038/nature01362); Lai et al., J. Am. Chem. Soc. 2003 (doi:10.1021/ja028650l); Cheng et al., J. Control. Release 2011 (doi:10.1016/j.jconrel.2011.01.030); Torney et al., Nat. Nanotechnol. 2007 (doi:10.1038/nnano.2007.108); Du et al., J. Am. Chem. Soc. 2009 (doi:10.1021/ja904982j); Tarn et al., Nanoscale 2014 (doi:10.1039/c3nr06049g); Ashley et al., Nat. Mater. 2011 (doi:10.1038/nmat2992). Not to scale.

## Questions

**What does the “Mesoporous silica with gatekeepers: capped pores for controlled release” template show?** A mesoporous silica nanoparticle is a pill bottle with thousands of 2–4 nm channels; the trick is the lid. Cadmium sulfide caps on disulfide tethers come off with a reducing agent, gold caps let plant cells receive a gene and its inducer, cyclodextrin valves open in acid, an azobenzene valve opens under near-UV light and reseals in the dark, and a lipid bilayer turns the particle into a protocell that targets cancer cells 10 000 times more tightly.

**What are the steps shown in “Mesoporous silica with gatekeepers: capped pores for controlled release”?** 1. The bottle: Ordered mesoporous silica by liquid-crystal templating (Kresge et al. 1992), proposed as a drug carrier (Vallet-Regí et al. 2001); channels 2–4 nm across (Mal et al. 2003). 2. Nanocrystal caps: CdS caps on disulfide tethers block vancomycin and ATP in the channels until DTT or mercaptoethanol cuts them (Lai et al. 2003). 3. Gold caps: 3 nm pores holding a gene and its chemical inducer, capped with gold particles; uncapping triggered gene expression in plant cells (Torney et al. 2007). 4. Molecular valves: α-Cyclodextrin on an anilino stalk opens when protonated at low pH (Du et al. 2009); an azobenzene valve opens under near-UV light and reseals as it relaxes (Tarn et al. 2014). 5. A membrane lid: Protocells: a lipid bilayer on the porous core; with a targeting peptide 10 000-fold higher affinity for liver cancer cells, 10⁶-fold more potent than liposomes (Ashley et al. 2011).

**What are the starting materials and the product?** Starting materials: MCM-41-type silica nanoparticles with ordered 2–4 nm channels, and caps: CdS or gold nanocrystals, cyclodextrin rings on stalks, lipid bilayers. Product: Silica carriers that hold their cargo until a chosen key opens the pores.

**Which papers is “Mesoporous silica with gatekeepers: capped pores for controlled release” based on?** Kresge et al., “Ordered mesoporous molecular sieves synthesized by a liquid-crystal template mechanism”, Nature 1992 (doi:10.1038/359710a0); Vallet-Regí et al., “A new property of MCM-41: drug delivery system”, Chem. Mater. 2001 (doi:10.1021/cm0011559); Mal, Fujiwara & Tanaka, “Photocontrolled reversible release of guest molecules from coumarin-modified mesoporous silica”, Nature 2003 (doi:10.1038/nature01362); Lai et al., “A mesoporous silica nanosphere-based carrier system with chemically removable CdS nanoparticle caps for stimuli-responsive controlled release of neurotransmitters and drug molecules”, J. Am. Chem. Soc. 2003 (doi:10.1021/ja028650l); Cheng et al., “Glutathione-responsive nano-vehicles as a promising platform for targeted intracellular drug and gene delivery”, J. Control. Release 2011 (doi:10.1016/j.jconrel.2011.01.030); Torney et al., “Mesoporous silica nanoparticles deliver DNA and chemicals into plants”, Nat. Nanotechnol. 2007 (doi:10.1038/nnano.2007.108); Du et al., “Controlled-access hollow mechanized silica nanocontainers”, J. Am. Chem. Soc. 2009 (doi:10.1021/ja904982j); Tarn et al., “A reversible light-operated nanovalve on mesoporous silica nanoparticles”, Nanoscale 2014 (doi:10.1039/c3nr06049g); Ashley et al., “The targeted delivery of multicomponent cargos to cancer cells by nanoporous particle-supported lipid bilayers”, Nat. Mater. 2011 (doi:10.1038/nmat2992).

**Can I edit the “Mesoporous silica with gatekeepers: capped pores for controlled release” template?** Yes. Open it in the LabCanvas editor: all 62 layers are editable, including 3 generated objects (structures, plots, equipment) with their own settings. Change the text, colours and layout, then export PNG, TIFF or PDF at the width and DPI the journal asks for.

**Do I need an account to use this template?** Not to view it here. To open and edit it, sign in to LabCanvas or create a free account (the free plan keeps up to 3 designs). Downloading the figure is part of LabCanvas Pro (US$19 a month or US$199 a year).
