# MOF water harvesters: from the adsorbent to the device in the desert

> Three tiers follow a metal–organic framework from adsorbent to harvester: how water fills a MOF-303 pore and why an S-shaped isotherm works in dry air; passive solar boxes that run one cycle a day and electrified harvesters that cycle in minutes; and the yields measured in the lab and the Arizona and Mojave deserts, from 0.1 to 1.3 L of water per kilogram of MOF per day, each with its humidity and temperature.

- Page: https://www.labcanvas.com/templates/graphical-abstracts/mof-water-harvesters-adsorbent-device-desert
- Open in the LabCanvas editor (LabCanvas account): https://www.labcanvas.com/editor.html?template=mof-water-harvesting-adsorbent-to-device
- Updated: 2026-10-14
- Category: Graphical abstracts
- Method: Graphical abstract
- Starting materials: Water-stable, microporous MOFs (MOF-801, aluminium MOF-303) as packed sorbent layers
- Product: Liquid water from desert air in passive solar and rapid-cycling harvesters
- Key result: 0.7 L kg⁻¹ day⁻¹ at 10 % RH in the Mojave and 1.3 L kg⁻¹ day⁻¹ indoors (Hanikel et al. 2019); 100 g kg⁻¹ per cycle in Arizona (Fathieh et al. 2018); ~14 % thermal efficiency (Kim et al. 2018)
- Figure: 1920 × 1080 px, 59 editable layers (4 generated objects with settings)

## Steps

1. **The adsorbent**: In MOF-303 the first water molecules bind polar linkers, then clusters, chains and a network form; multivariate pores tune binding and regeneration (Hanikel et al. 2021). MOFs trap water at RH as low as 10 % (Xu & Yaghi 2020)
2. **One cycle a day**: Night air loads the MOF; sunlight releases the water to a condenser: 2.8 L kg⁻¹ day⁻¹ at 20 % RH with < 1 sun (Kim et al. 2017); in Arizona, 100 g kg⁻¹ per day–night cycle with MOF-801 and more than twice with MOF-303 (Fathieh et al. 2018); air-cooled, ~14 % thermal efficiency, > 0.25 L kg⁻¹ per cycle (Kim et al. 2018)
3. **Cycles in minutes**: MOF-303 adsorbs and desorbs within minutes under a mild temperature swing: 1.3 L kg⁻¹ day⁻¹ indoors (32 % RH, 27 °C) and 0.7 L kg⁻¹ day⁻¹ in the Mojave (down to 10 % RH) (Hanikel et al. 2019)

## Uses

- Graphical abstracts on atmospheric water harvesting
- Talks on sorbent and device design for arid climates
- Teaching adsorption–desorption cycling and why kinetics matter

## References

1. Kim et al., “Water harvesting from air with metal-organic frameworks powered by natural sunlight”, Science 2017. https://doi.org/10.1126/science.aam8743 (method origin)
2. Kim et al., “Adsorption-based atmospheric water harvesting device for arid climates”, Nat. Commun. 2018. https://doi.org/10.1038/s41467-018-03162-7 (primary)
3. Fathieh et al., “Practical water production from desert air”, Sci. Adv. 2018. https://doi.org/10.1126/sciadv.aat3198 (primary)
4. Hanikel et al., “Rapid cycling and exceptional yield in a metal-organic framework water harvester”, ACS Cent. Sci. 2019. https://doi.org/10.1021/acscentsci.9b00745 (primary)
5. Hanikel et al., “Evolution of water structures in metal-organic frameworks for improved atmospheric water harvesting”, Science 2021. https://doi.org/10.1126/science.abj0890 (primary)
6. Xu & Yaghi, “Metal–organic frameworks for water harvesting from air, anywhere, anytime”, ACS Cent. Sci. 2020. https://doi.org/10.1021/acscentsci.0c00678 (review)

Credit: Drawn by LabCanvas after Kim et al., Science 2017 (doi:10.1126/science.aam8743); Kim et al., Nat. Commun. 2018 (doi:10.1038/s41467-018-03162-7); Fathieh et al., Sci. Adv. 2018 (doi:10.1126/sciadv.aat3198); Hanikel et al., ACS Cent. Sci. 2019 (doi:10.1021/acscentsci.9b00745); Hanikel et al., Science 2021 (doi:10.1126/science.abj0890); Xu & Yaghi, ACS Cent. Sci. 2020 (doi:10.1021/acscentsci.0c00678). Isotherm schematic.

## Questions

**What does the “MOF water harvesters: from the adsorbent to the device in the desert” template show?** Three tiers follow a metal–organic framework from adsorbent to harvester: how water fills a MOF-303 pore and why an S-shaped isotherm works in dry air; passive solar boxes that run one cycle a day and electrified harvesters that cycle in minutes; and the yields measured in the lab and the Arizona and Mojave deserts, from 0.1 to 1.3 L of water per kilogram of MOF per day, each with its humidity and temperature.

**What are the steps shown in “MOF water harvesters: from the adsorbent to the device in the desert”?** 1. The adsorbent: In MOF-303 the first water molecules bind polar linkers, then clusters, chains and a network form; multivariate pores tune binding and regeneration (Hanikel et al. 2021). MOFs trap water at RH as low as 10 % (Xu & Yaghi 2020). 2. One cycle a day: Night air loads the MOF; sunlight releases the water to a condenser: 2.8 L kg⁻¹ day⁻¹ at 20 % RH with < 1 sun (Kim et al. 2017); in Arizona, 100 g kg⁻¹ per day–night cycle with MOF-801 and more than twice with MOF-303 (Fathieh et al. 2018); air-cooled, ~14 % thermal efficiency, > 0.25 L kg⁻¹ per cycle (Kim et al. 2018). 3. Cycles in minutes: MOF-303 adsorbs and desorbs within minutes under a mild temperature swing: 1.3 L kg⁻¹ day⁻¹ indoors (32 % RH, 27 °C) and 0.7 L kg⁻¹ day⁻¹ in the Mojave (down to 10 % RH) (Hanikel et al. 2019).

**What are the starting materials and the product?** Starting materials: Water-stable, microporous MOFs (MOF-801, aluminium MOF-303) as packed sorbent layers. Product: Liquid water from desert air in passive solar and rapid-cycling harvesters.

**Which papers is “MOF water harvesters: from the adsorbent to the device in the desert” based on?** Kim et al., “Water harvesting from air with metal-organic frameworks powered by natural sunlight”, Science 2017 (doi:10.1126/science.aam8743); Kim et al., “Adsorption-based atmospheric water harvesting device for arid climates”, Nat. Commun. 2018 (doi:10.1038/s41467-018-03162-7); Fathieh et al., “Practical water production from desert air”, Sci. Adv. 2018 (doi:10.1126/sciadv.aat3198); Hanikel et al., “Rapid cycling and exceptional yield in a metal-organic framework water harvester”, ACS Cent. Sci. 2019 (doi:10.1021/acscentsci.9b00745); Hanikel et al., “Evolution of water structures in metal-organic frameworks for improved atmospheric water harvesting”, Science 2021 (doi:10.1126/science.abj0890); Xu & Yaghi, “Metal–organic frameworks for water harvesting from air, anywhere, anytime”, ACS Cent. Sci. 2020 (doi:10.1021/acscentsci.0c00678).

**Can I edit the “MOF water harvesters: from the adsorbent to the device in the desert” template?** Yes. Open it in the LabCanvas editor: all 59 layers are editable, including 4 generated objects (structures, plots, equipment) with their own settings. Change the text, colours and layout, then export PNG, TIFF or PDF at the width and DPI the journal asks for.

**Do I need an account to use this template?** Not to view it here. To open and edit it, sign in to LabCanvas or create a free account (the free plan keeps up to 3 designs). Downloading the figure is part of LabCanvas Pro (US$19 a month or US$199 a year).
