# MXene films: one stack of flakes that stores charge and blocks radiation

> Beyond etching: Ti₃C₂Tₓ swells and opens into single flakes, and the wet clay rolls into films. A cross-section of one film shows its two jobs: in an electrolyte, cations slip between the flakes for up to 900 F cm⁻³; in air, a 45 µm film reflects and absorbs microwaves for 92 dB of shielding, with multiple internal reflections between flakes.

- Page: https://www.labcanvas.com/templates/graphical-abstracts/mxene-films-stack-flakes-that-stores-charge-blocks-radiation
- Open in the LabCanvas editor (LabCanvas account): https://www.labcanvas.com/editor.html?template=mxene-films-delamination-emi-shielding-energy-storage
- Updated: 2026-10-14
- Category: Graphical abstracts
- Method: Graphical abstract
- Starting materials: Etched multilayer Ti₃C₂Tₓ (from Ti₃AlC₂ in LiF and HCl)
- Product: Free-standing films of stacked Ti₃C₂Tₓ flakes for EMI shielding and charge storage
- Key result: 900 F cm⁻³ clay films (Ghidiu et al. 2014); > 300 F cm⁻³ by cation intercalation (Lukatskaya et al. 2013); 92 dB at 45 µm, > 50 dB at 2.5 µm, 4600 S cm⁻¹ (Shahzad et al. 2016)
- Figure: 1920 × 1080 px, 686 editable layers (2 generated objects with settings)

## Steps

1. **Open the stack**: Etched in LiF and HCl instead of concentrated HF, the hydrophilic carbide swells in water (Ghidiu et al. 2014); the protocol sets the delamination yield and flake quality (Alhabeb et al. 2017)
2. **Roll a film**: The hydrated carbide shapes like clay and rolls into films tens of micrometres thick (Ghidiu et al. 2014); flakes also spin-, spray- or dip-coat, paint and print (Alhabeb et al. 2017)
3. **Store charge**: Cations (Na⁺, K⁺, NH₄⁺, Mg²⁺, Al³⁺) intercalate between the layers: > 300 F cm⁻³ (Lukatskaya et al. 2013); additive-free clay films reach 900 F cm⁻³ (Ghidiu et al. 2014)
4. **Block radiation**: A 45 µm film shields 92 dB (> 50 dB at 2.5 µm), from 4600 S cm⁻¹ conductivity and multiple internal reflections (Shahzad et al. 2016)
5. **Absorb instead**: Annealed Ti₃CNTₓ shields better than Ti₃C₂Tₓ or metal foil of the same thickness, by anomalous absorption (Iqbal et al. 2020)

## Uses

- Graphical abstracts on MXene films, inks and devices
- Talks on EMI shielding and volumetric energy storage with 2D materials
- Teaching intercalation pseudocapacitance and shielding by reflection and absorption

## References

1. Ghidiu et al., “Conductive two-dimensional titanium carbide ‘clay’ with high volumetric capacitance”, Nature 2014. https://doi.org/10.1038/nature13970 (primary)
2. Lukatskaya et al., “Cation intercalation and high volumetric capacitance of two-dimensional titanium carbide”, Science 2013. https://doi.org/10.1126/science.1241488 (primary)
3. Shahzad et al., “Electromagnetic interference shielding with 2D transition metal carbides (MXenes)”, Science 2016. https://doi.org/10.1126/science.aag2421 (primary)
4. Iqbal et al., “Anomalous absorption of electromagnetic waves by 2D transition metal carbonitride Ti3CNTx (MXene)”, Science 2020. https://doi.org/10.1126/science.aba7977 (primary)
5. Alhabeb et al., “Guidelines for synthesis and processing of two-dimensional titanium carbide (Ti3C2Tx MXene)”, Chem. Mater. 2017. https://doi.org/10.1021/acs.chemmater.7b02847 (method origin)

Credit: Drawn by LabCanvas after Ghidiu et al., Nature 2014 (doi:10.1038/nature13970); Lukatskaya et al., Science 2013 (doi:10.1126/science.1241488); Shahzad et al., Science 2016 (doi:10.1126/science.aag2421); Iqbal et al., Science 2020 (doi:10.1126/science.aba7977); Alhabeb et al., Chem. Mater. 2017 (doi:10.1021/acs.chemmater.7b02847). Film section schematic.

## Questions

**What does the “MXene films: one stack of flakes that stores charge and blocks radiation” template show?** Beyond etching: Ti₃C₂Tₓ swells and opens into single flakes, and the wet clay rolls into films. A cross-section of one film shows its two jobs: in an electrolyte, cations slip between the flakes for up to 900 F cm⁻³; in air, a 45 µm film reflects and absorbs microwaves for 92 dB of shielding, with multiple internal reflections between flakes.

**What are the steps shown in “MXene films: one stack of flakes that stores charge and blocks radiation”?** 1. Open the stack: Etched in LiF and HCl instead of concentrated HF, the hydrophilic carbide swells in water (Ghidiu et al. 2014); the protocol sets the delamination yield and flake quality (Alhabeb et al. 2017). 2. Roll a film: The hydrated carbide shapes like clay and rolls into films tens of micrometres thick (Ghidiu et al. 2014); flakes also spin-, spray- or dip-coat, paint and print (Alhabeb et al. 2017). 3. Store charge: Cations (Na⁺, K⁺, NH₄⁺, Mg²⁺, Al³⁺) intercalate between the layers: > 300 F cm⁻³ (Lukatskaya et al. 2013); additive-free clay films reach 900 F cm⁻³ (Ghidiu et al. 2014). 4. Block radiation: A 45 µm film shields 92 dB (> 50 dB at 2.5 µm), from 4600 S cm⁻¹ conductivity and multiple internal reflections (Shahzad et al. 2016). 5. Absorb instead: Annealed Ti₃CNTₓ shields better than Ti₃C₂Tₓ or metal foil of the same thickness, by anomalous absorption (Iqbal et al. 2020).

**What are the starting materials and the product?** Starting materials: Etched multilayer Ti₃C₂Tₓ (from Ti₃AlC₂ in LiF and HCl). Product: Free-standing films of stacked Ti₃C₂Tₓ flakes for EMI shielding and charge storage.

**Which papers is “MXene films: one stack of flakes that stores charge and blocks radiation” based on?** Ghidiu et al., “Conductive two-dimensional titanium carbide ‘clay’ with high volumetric capacitance”, Nature 2014 (doi:10.1038/nature13970); Lukatskaya et al., “Cation intercalation and high volumetric capacitance of two-dimensional titanium carbide”, Science 2013 (doi:10.1126/science.1241488); Shahzad et al., “Electromagnetic interference shielding with 2D transition metal carbides (MXenes)”, Science 2016 (doi:10.1126/science.aag2421); Iqbal et al., “Anomalous absorption of electromagnetic waves by 2D transition metal carbonitride Ti3CNTx (MXene)”, Science 2020 (doi:10.1126/science.aba7977); Alhabeb et al., “Guidelines for synthesis and processing of two-dimensional titanium carbide (Ti3C2Tx MXene)”, Chem. Mater. 2017 (doi:10.1021/acs.chemmater.7b02847).

**Can I edit the “MXene films: one stack of flakes that stores charge and blocks radiation” template?** Yes. Open it in the LabCanvas editor: all 686 layers are editable, including 2 generated objects (structures, plots, equipment) with their own settings. Change the text, colours and layout, then export PNG, TIFF or PDF at the width and DPI the journal asks for.

**Do I need an account to use this template?** Not to view it here. To open and edit it, sign in to LabCanvas or create a free account (the free plan keeps up to 3 designs). Downloading the figure is part of LabCanvas Pro (US$19 a month or US$199 a year).
