# Perovskite solar-cell stability: ion migration, interfaces and encapsulation

> What degrades a perovskite solar cell and what protects it. Water, oxygen, UV light and heat attack from outside — methylammonium lead iodide decomposes at 85 °C even under inert gas — while iodide vacancies migrate inside the absorber (activation energy about 0.6 eV) and gold creeps through the hole conductor at 70 °C. A 2D/3D perovskite interface kept printed modules unchanged for more than 10,000 h, a chromium interlayer stops the gold, a compliant encapsulant survives temperature cycling, and ISOS protocols make the tests comparable.

- Page: https://www.labcanvas.com/templates/graphical-abstracts/perovskite-solar-cell-stability-ion-migration-interfaces-encapsulation
- Open in the LabCanvas editor (LabCanvas account): https://www.labcanvas.com/editor.html?template=perovskite-solar-cell-stability-ions-interfaces-encapsulation
- Updated: 2026-10-14
- Category: Graphical abstracts
- Method: Graphical abstract
- Starting materials: A perovskite solar cell: glass/FTO, an electron contact, the perovskite, spiro-OMeTAD and gold
- Product: A cell that keeps its efficiency under light, heat and humidity
- Key result: Decomposition at 85 °C in inert atmosphere (Conings et al. 2015); iodide migration Ea 0.6 eV (Eames et al. 2015); Au migration at 70 °C (Domanski et al. 2016); > 10,000 h, 11.2% modules (Grancini et al. 2017)
- Figure: 1920 × 1080 px, 137 editable layers (8 generated objects with settings)

## Steps

1. **Threats from outside**: Oxygen and moisture, UV light and temperature (Niu et al. 2015); MAPbI₃ decomposes at 85 °C even in inert atmosphere (Conings et al. 2015)
2. **Threats from inside**: Iodide vacancies migrate with an activation energy of 0.6 eV, a source of hysteresis (Eames et al. 2015; Snaith et al. 2014); gold diffuses through spiro-MeOTAD at 70 °C (Domanski et al. 2016)
3. **Engineer the interface**: A 2D/3D perovskite junction: 10 × 10 cm² modules stable > 10,000 h with zero loss (Grancini et al. 2017)
4. **Block the metal**: A Cr interlayer between hole conductor and gold avoids the heat-induced irreversible losses (Domanski et al. 2016)
5. **Seal it**: A compliant EVA encapsulant keeps performance through temperature cycling (Cheacharoen et al. 2018)
6. **Test it alike**: ISOS-based protocols, with procedures for ion redistribution and reversible degradation (Khenkin et al. 2020)

## Uses

- Graphical abstracts on perovskite stability and degradation
- Talks on encapsulation and interface engineering
- Teaching why perovskite cells degrade

## References

1. Niu, Guo & Wang, “Review of recent progress in chemical stability of perovskite solar cells”, J. Mater. Chem. A 2015. https://doi.org/10.1039/C4TA04994B (review)
2. Conings et al., “Intrinsic thermal instability of methylammonium lead trihalide perovskite”, Adv. Energy Mater. 2015. https://doi.org/10.1002/aenm.201500477 (primary)
3. Eames, Frost, Barnes, O’Regan, Walsh & Islam, “Ionic transport in hybrid lead iodide perovskite solar cells”, Nat. Commun. 2015. https://doi.org/10.1038/ncomms8497 (primary)
4. Snaith et al., “Anomalous hysteresis in perovskite solar cells”, J. Phys. Chem. Lett. 2014. https://doi.org/10.1021/jz500113x (primary)
5. Domanski et al., “Not all that glitters is gold: metal-migration-induced degradation in perovskite solar cells”, ACS Nano 2016. https://doi.org/10.1021/acsnano.6b02613 (primary)
6. Grancini et al., “One-year stable perovskite solar cells by 2D/3D interface engineering”, Nat. Commun. 2017. https://doi.org/10.1038/ncomms15684 (primary)
7. Cheacharoen, Rolston, Harwood, Bush, Dauskardt & McGehee, “Design and understanding of encapsulated perovskite solar cells to withstand temperature cycling”, Energy Environ. Sci. 2018. https://doi.org/10.1039/C7EE02564E (primary)
8. Khenkin et al., “Consensus statement for stability assessment and reporting for perovskite photovoltaics based on ISOS procedures”, Nat. Energy 2020. https://doi.org/10.1038/s41560-019-0529-5 (review)

Credit: Drawn by LabCanvas after Niu, Guo & Wang, J. Mater. Chem. A 2015 (doi:10.1039/C4TA04994B); Conings et al., Adv. Energy Mater. 2015 (doi:10.1002/aenm.201500477); Eames et al., Nat. Commun. 2015 (doi:10.1038/ncomms8497); Snaith et al., J. Phys. Chem. Lett. 2014 (doi:10.1021/jz500113x); Domanski et al., ACS Nano 2016 (doi:10.1021/acsnano.6b02613); Grancini et al., Nat. Commun. 2017 (doi:10.1038/ncomms15684); Cheacharoen et al., Energy Environ. Sci. 2018 (doi:10.1039/C7EE02564E); Khenkin et al., Nat. Energy 2020 (doi:10.1038/s41560-019-0529-5). Stack and markers schematic.

## Questions

**What does the “Perovskite solar-cell stability: ion migration, interfaces and encapsulation” template show?** What degrades a perovskite solar cell and what protects it. Water, oxygen, UV light and heat attack from outside — methylammonium lead iodide decomposes at 85 °C even under inert gas — while iodide vacancies migrate inside the absorber (activation energy about 0.6 eV) and gold creeps through the hole conductor at 70 °C. A 2D/3D perovskite interface kept printed modules unchanged for more than 10,000 h, a chromium interlayer stops the gold, a compliant encapsulant survives temperature cycling, and ISOS protocols make the tests comparable.

**What are the steps shown in “Perovskite solar-cell stability: ion migration, interfaces and encapsulation”?** 1. Threats from outside: Oxygen and moisture, UV light and temperature (Niu et al. 2015); MAPbI₃ decomposes at 85 °C even in inert atmosphere (Conings et al. 2015). 2. Threats from inside: Iodide vacancies migrate with an activation energy of 0.6 eV, a source of hysteresis (Eames et al. 2015; Snaith et al. 2014); gold diffuses through spiro-MeOTAD at 70 °C (Domanski et al. 2016). 3. Engineer the interface: A 2D/3D perovskite junction: 10 × 10 cm² modules stable > 10,000 h with zero loss (Grancini et al. 2017). 4. Block the metal: A Cr interlayer between hole conductor and gold avoids the heat-induced irreversible losses (Domanski et al. 2016). 5. Seal it: A compliant EVA encapsulant keeps performance through temperature cycling (Cheacharoen et al. 2018). 6. Test it alike: ISOS-based protocols, with procedures for ion redistribution and reversible degradation (Khenkin et al. 2020).

**What are the starting materials and the product?** Starting materials: A perovskite solar cell: glass/FTO, an electron contact, the perovskite, spiro-OMeTAD and gold. Product: A cell that keeps its efficiency under light, heat and humidity.

**Which papers is “Perovskite solar-cell stability: ion migration, interfaces and encapsulation” based on?** Niu, Guo & Wang, “Review of recent progress in chemical stability of perovskite solar cells”, J. Mater. Chem. A 2015 (doi:10.1039/C4TA04994B); Conings et al., “Intrinsic thermal instability of methylammonium lead trihalide perovskite”, Adv. Energy Mater. 2015 (doi:10.1002/aenm.201500477); Eames, Frost, Barnes, O’Regan, Walsh & Islam, “Ionic transport in hybrid lead iodide perovskite solar cells”, Nat. Commun. 2015 (doi:10.1038/ncomms8497); Snaith et al., “Anomalous hysteresis in perovskite solar cells”, J. Phys. Chem. Lett. 2014 (doi:10.1021/jz500113x); Domanski et al., “Not all that glitters is gold: metal-migration-induced degradation in perovskite solar cells”, ACS Nano 2016 (doi:10.1021/acsnano.6b02613); Grancini et al., “One-year stable perovskite solar cells by 2D/3D interface engineering”, Nat. Commun. 2017 (doi:10.1038/ncomms15684); Cheacharoen, Rolston, Harwood, Bush, Dauskardt & McGehee, “Design and understanding of encapsulated perovskite solar cells to withstand temperature cycling”, Energy Environ. Sci. 2018 (doi:10.1039/C7EE02564E); Khenkin et al., “Consensus statement for stability assessment and reporting for perovskite photovoltaics based on ISOS procedures”, Nat. Energy 2020 (doi:10.1038/s41560-019-0529-5).

**Can I edit the “Perovskite solar-cell stability: ion migration, interfaces and encapsulation” template?** Yes. Open it in the LabCanvas editor: all 137 layers are editable, including 8 generated objects (structures, plots, equipment) with their own settings. Change the text, colours and layout, then export PNG, TIFF or PDF at the width and DPI the journal asks for.

**Do I need an account to use this template?** Not to view it here. To open and edit it, sign in to LabCanvas or create a free account (the free plan keeps up to 3 designs). Downloading the figure is part of LabCanvas Pro (US$19 a month or US$199 a year).
