# Photocatalytic water splitting: band edges, cocatalysts and the Z-scheme

> Particulate photocatalysts in three steps: a band gap whose edges straddle water’s two redox levels (at least 1.23 eV apart) absorbs the light; cocatalysts on different facets pull electrons to make H₂ and holes to make O₂ (96% external quantum efficiency in the UV on Al-doped SrTiO₃); and two visible-light absorbers coupled in a Z-scheme — SrTiO₃:Rh for hydrogen and BiVO₄ for oxygen — use two photons per electron, through an Fe³⁺/Fe²⁺ shuttle, by direct contact or through gold in a sheet with 1.1% solar-to-hydrogen efficiency.

- Page: https://www.labcanvas.com/templates/graphical-abstracts/photocatalytic-water-splitting-band-edges-cocatalysts-z-scheme
- Open in the LabCanvas editor (LabCanvas account): https://www.labcanvas.com/editor.html?template=photocatalytic-water-splitting-band-edges-cocatalysts-z-scheme
- Updated: 2026-10-14
- Category: Graphical abstracts
- Method: Graphical abstract
- Starting materials: Water, sunlight and a semiconductor powder carrying cocatalysts
- Product: H₂ and O₂ in a 2 : 1 ratio
- Key result: EQE up to 96% at 350–360 nm (Takata et al. 2020); QY 5.2% at 420 nm for H₂ on Pt/SrTiO₃:Rh (Konta et al. 2004); AQY 0.3% at 440 nm (Kato et al. 2004); STH 1.1%, AQY > 30% at 419 nm (Wang et al. 2016); band edges schematic
- Figure: 1920 × 1080 px, 73 editable layers (1 generated objects with settings)

## Steps

1. **1 · Absorb**: Photons above the band gap make electron–hole pairs (Wang & Domen 2020); the conduction band must lie above H⁺/H₂ (0 V) and the valence band below O₂/H₂O (+1.23 V vs NHE at pH 0)
2. **2 · Separate and react**: Cocatalysts collect the carriers: Rh/Cr₂O₃ for H₂ and CoOOH for O₂ on different facets of SrTiO₃:Al gave up to 96% external quantum efficiency at 350–360 nm (Takata et al. 2020); Rh–Cr oxide on GaN:ZnO worked in visible light (Maeda et al. 2006)
3. **3 · Two photons: the Z-scheme**: SrTiO₃:Rh makes H₂ and BiVO₄ makes O₂: with an Fe³⁺/Fe²⁺ relay, 0.3% apparent quantum yield at 440 nm (Kato et al. 2004); by direct contact (Sasaki et al. 2009); through gold in a sheet, 1.1% solar-to-hydrogen (Wang et al. 2016)

## Uses

- Graphical abstracts on photocatalysis and solar hydrogen
- Teaching band alignment and Z-schemes
- Talks on cocatalysts and charge separation

## References

1. Fujishima & Honda, “Electrochemical photolysis of water at a semiconductor electrode”, Nature 1972. https://doi.org/10.1038/238037a0 (primary)
2. Kudo & Miseki, “Heterogeneous photocatalyst materials for water splitting”, Chem. Soc. Rev. 2009. https://doi.org/10.1039/b800489g (review)
3. Wang & Domen, “Particulate photocatalysts for light-driven water splitting: mechanisms, challenges, and design strategies”, Chem. Rev. 2020. https://doi.org/10.1021/acs.chemrev.9b00201 (review)
4. Maeda, Teramura, Lu, Takata, Saito, Inoue & Domen, “Photocatalyst releasing hydrogen from water”, Nature 2006. https://doi.org/10.1038/440295a (primary)
5. Takata et al., “Photocatalytic water splitting with a quantum efficiency of almost unity”, Nature 2020. https://doi.org/10.1038/s41586-020-2278-9 (primary)
6. Konta, Ishii, Kato & Kudo, “Photocatalytic activities of noble metal ion doped SrTiO₃ under visible light irradiation”, J. Phys. Chem. B 2004. https://doi.org/10.1021/jp049556p (primary)
7. Kato, Hori, Konta, Shimodaira & Kudo, “Construction of Z-scheme type heterogeneous photocatalysis systems for water splitting into H₂ and O₂ under visible light irradiation”, Chem. Lett. 2004. https://doi.org/10.1246/cl.2004.1348 (primary)
8. Sasaki, Nemoto, Saito & Kudo, “Solar water splitting using powdered photocatalysts driven by Z-schematic interparticle electron transfer without an electron mediator”, J. Phys. Chem. C 2009. https://doi.org/10.1021/jp907128k (primary)
9. Wang et al., “Scalable water splitting on particulate photocatalyst sheets with a solar-to-hydrogen energy conversion efficiency exceeding 1%”, Nat. Mater. 2016. https://doi.org/10.1038/nmat4589 (primary)

Credit: Drawn by LabCanvas after Fujishima & Honda, Nature 1972 (doi:10.1038/238037a0); Kudo & Miseki, Chem. Soc. Rev. 2009 (doi:10.1039/b800489g); Wang & Domen, Chem. Rev. 2020 (doi:10.1021/acs.chemrev.9b00201); Maeda et al., Nature 2006 (doi:10.1038/440295a); Takata et al., Nature 2020 (doi:10.1038/s41586-020-2278-9); Konta et al., J. Phys. Chem. B 2004 (doi:10.1021/jp049556p); Kato et al., Chem. Lett. 2004 (doi:10.1246/cl.2004.1348); Sasaki et al., J. Phys. Chem. C 2009 (doi:10.1021/jp907128k); Wang et al., Nat. Mater. 2016 (doi:10.1038/nmat4589). Band edges schematic.

## Questions

**What does the “Photocatalytic water splitting: band edges, cocatalysts and the Z-scheme” template show?** Particulate photocatalysts in three steps: a band gap whose edges straddle water’s two redox levels (at least 1.23 eV apart) absorbs the light; cocatalysts on different facets pull electrons to make H₂ and holes to make O₂ (96% external quantum efficiency in the UV on Al-doped SrTiO₃); and two visible-light absorbers coupled in a Z-scheme — SrTiO₃:Rh for hydrogen and BiVO₄ for oxygen — use two photons per electron, through an Fe³⁺/Fe²⁺ shuttle, by direct contact or through gold in a sheet with 1.1% solar-to-hydrogen efficiency.

**What are the steps shown in “Photocatalytic water splitting: band edges, cocatalysts and the Z-scheme”?** 1. 1 · Absorb: Photons above the band gap make electron–hole pairs (Wang & Domen 2020); the conduction band must lie above H⁺/H₂ (0 V) and the valence band below O₂/H₂O (+1.23 V vs NHE at pH 0). 2. 2 · Separate and react: Cocatalysts collect the carriers: Rh/Cr₂O₃ for H₂ and CoOOH for O₂ on different facets of SrTiO₃:Al gave up to 96% external quantum efficiency at 350–360 nm (Takata et al. 2020); Rh–Cr oxide on GaN:ZnO worked in visible light (Maeda et al. 2006). 3. 3 · Two photons: the Z-scheme: SrTiO₃:Rh makes H₂ and BiVO₄ makes O₂: with an Fe³⁺/Fe²⁺ relay, 0.3% apparent quantum yield at 440 nm (Kato et al. 2004); by direct contact (Sasaki et al. 2009); through gold in a sheet, 1.1% solar-to-hydrogen (Wang et al. 2016).

**What are the starting materials and the product?** Starting materials: Water, sunlight and a semiconductor powder carrying cocatalysts. Product: H₂ and O₂ in a 2 : 1 ratio.

**Which papers is “Photocatalytic water splitting: band edges, cocatalysts and the Z-scheme” based on?** Fujishima & Honda, “Electrochemical photolysis of water at a semiconductor electrode”, Nature 1972 (doi:10.1038/238037a0); Kudo & Miseki, “Heterogeneous photocatalyst materials for water splitting”, Chem. Soc. Rev. 2009 (doi:10.1039/b800489g); Wang & Domen, “Particulate photocatalysts for light-driven water splitting: mechanisms, challenges, and design strategies”, Chem. Rev. 2020 (doi:10.1021/acs.chemrev.9b00201); Maeda, Teramura, Lu, Takata, Saito, Inoue & Domen, “Photocatalyst releasing hydrogen from water”, Nature 2006 (doi:10.1038/440295a); Takata et al., “Photocatalytic water splitting with a quantum efficiency of almost unity”, Nature 2020 (doi:10.1038/s41586-020-2278-9); Konta, Ishii, Kato & Kudo, “Photocatalytic activities of noble metal ion doped SrTiO₃ under visible light irradiation”, J. Phys. Chem. B 2004 (doi:10.1021/jp049556p); Kato, Hori, Konta, Shimodaira & Kudo, “Construction of Z-scheme type heterogeneous photocatalysis systems for water splitting into H₂ and O₂ under visible light irradiation”, Chem. Lett. 2004 (doi:10.1246/cl.2004.1348); Sasaki, Nemoto, Saito & Kudo, “Solar water splitting using powdered photocatalysts driven by Z-schematic interparticle electron transfer without an electron mediator”, J. Phys. Chem. C 2009 (doi:10.1021/jp907128k); Wang et al., “Scalable water splitting on particulate photocatalyst sheets with a solar-to-hydrogen energy conversion efficiency exceeding 1%”, Nat. Mater. 2016 (doi:10.1038/nmat4589).

**Can I edit the “Photocatalytic water splitting: band edges, cocatalysts and the Z-scheme” template?** Yes. Open it in the LabCanvas editor: all 73 layers are editable, including 1 generated objects (structures, plots, equipment) with their own settings. Change the text, colours and layout, then export PNG, TIFF or PDF at the width and DPI the journal asks for.

**Do I need an account to use this template?** Not to view it here. To open and edit it, sign in to LabCanvas or create a free account (the free plan keeps up to 3 designs). Downloading the figure is part of LabCanvas Pro (US$19 a month or US$199 a year).
