# Polymer recycling: mechanical, chemical and enzymatic routes compared

> Of about 6,300 Mt of plastic waste made by 2015, 9% was recycled, 12% incinerated and 79% landfilled or left in the environment. Three ways to close the loop, seen at the level of the chains: melting and re-extruding keeps the polymer but degrades it; chemical routes break it into monomers or into oils and waxes (polyethylene to lubricants on Pt/SrTiO₃; mixed plastics oxidised and funnelled by a bacterium); and an engineered enzyme depolymerised at least 90% of PET in 10 hours, the monomers going back into bottles.

- Page: https://www.labcanvas.com/templates/graphical-abstracts/polymer-recycling-mechanical-chemical-enzymatic-routes-compared
- Open in the LabCanvas editor (LabCanvas account): https://www.labcanvas.com/editor.html?template=polymer-recycling-mechanical-chemical-enzymatic
- Updated: 2026-10-14
- Category: Graphical abstracts
- Method: Graphical abstract
- Starting materials: Post-consumer plastic waste (PET, PE, PP, PS, PVC, mixtures)
- Product: Recycled polymer, monomers, or oils and waxes
- Key result: 9 / 12 / 79% of 6,300 Mt (Geyer et al. 2017); ≥ 90% in 10 h, 16.7 g L⁻¹ h⁻¹ (Tournier et al. 2020); 300 °C, 170 psi H₂ (Celik et al. 2019)
- Figure: 1920 × 1080 px, 151 editable layers (4 generated objects with settings)

## Steps

1. **The problem**: ~6,300 Mt of plastic waste by 2015: ~9% recycled, 12% incinerated, 79% in landfills or the environment (Geyer et al. 2017)
2. **Mechanical**: Melt and re-extrude: the chains stay but degrade, with cost and uneven quality as further limits (Schyns & Shaver 2021)
3. **Chemical**: Break the chains: each process suits its own stream (Vollmer et al. 2020); polyethylene to lubricants and waxes on Pt/SrTiO₃ (Celik et al. 2019); mixed plastics oxidised then funnelled by P. putida (Sullivan et al. 2022)
4. **Enzymatic**: A PET hydrolase cuts the ester bonds: ≥ 90% depolymerisation in 10 h, monomers back into bottles (Tournier et al. 2020; Yoshida et al. 2016)

## Uses

- Graphical abstracts on plastics recycling and the circular economy
- Teaching what recycling does to polymer chains
- Talks comparing mechanical, chemical and biological recycling

## References

1. Geyer, Jambeck & Law, “Production, use, and fate of all plastics ever made”, Sci. Adv. 2017. https://doi.org/10.1126/sciadv.1700782 (primary)
2. Schyns & Shaver, “Mechanical recycling of packaging plastics: a review”, Macromol. Rapid Commun. 2021. https://doi.org/10.1002/marc.202000415 (review)
3. Vollmer et al., “Beyond mechanical recycling: giving new life to plastic waste”, Angew. Chem. Int. Ed. 2020. https://doi.org/10.1002/anie.201915651 (review)
4. Celik et al., “Upcycling single-use polyethylene into high-quality liquid products”, ACS Cent. Sci. 2019. https://doi.org/10.1021/acscentsci.9b00722 (primary)
5. Sullivan et al., “Mixed plastics waste valorization through tandem chemical oxidation and biological funneling”, Science 2022. https://doi.org/10.1126/science.abo4626 (primary)
6. Yoshida et al., “A bacterium that degrades and assimilates poly(ethylene terephthalate)”, Science 2016. https://doi.org/10.1126/science.aad6359 (primary)
7. Tournier et al., “An engineered PET depolymerase to break down and recycle plastic bottles”, Nature 2020. https://doi.org/10.1038/s41586-020-2149-4 (primary)

Credit: Drawn by LabCanvas after Geyer, Jambeck & Law, Sci. Adv. 2017 (doi:10.1126/sciadv.1700782); Schyns & Shaver, Macromol. Rapid Commun. 2021 (doi:10.1002/marc.202000415); Vollmer et al., Angew. Chem. 2020 (doi:10.1002/anie.201915651); Celik et al., ACS Cent. Sci. 2019 (doi:10.1021/acscentsci.9b00722); Sullivan et al., Science 2022 (doi:10.1126/science.abo4626); Yoshida et al., Science 2016 (doi:10.1126/science.aad6359); Tournier et al., Nature 2020 (doi:10.1038/s41586-020-2149-4). Chains schematic; waffle from Geyer et al.

## Questions

**What does the “Polymer recycling: mechanical, chemical and enzymatic routes compared” template show?** Of about 6,300 Mt of plastic waste made by 2015, 9% was recycled, 12% incinerated and 79% landfilled or left in the environment. Three ways to close the loop, seen at the level of the chains: melting and re-extruding keeps the polymer but degrades it; chemical routes break it into monomers or into oils and waxes (polyethylene to lubricants on Pt/SrTiO₃; mixed plastics oxidised and funnelled by a bacterium); and an engineered enzyme depolymerised at least 90% of PET in 10 hours, the monomers going back into bottles.

**What are the steps shown in “Polymer recycling: mechanical, chemical and enzymatic routes compared”?** 1. The problem: ~6,300 Mt of plastic waste by 2015: ~9% recycled, 12% incinerated, 79% in landfills or the environment (Geyer et al. 2017). 2. Mechanical: Melt and re-extrude: the chains stay but degrade, with cost and uneven quality as further limits (Schyns & Shaver 2021). 3. Chemical: Break the chains: each process suits its own stream (Vollmer et al. 2020); polyethylene to lubricants and waxes on Pt/SrTiO₃ (Celik et al. 2019); mixed plastics oxidised then funnelled by P. putida (Sullivan et al. 2022). 4. Enzymatic: A PET hydrolase cuts the ester bonds: ≥ 90% depolymerisation in 10 h, monomers back into bottles (Tournier et al. 2020; Yoshida et al. 2016).

**What are the starting materials and the product?** Starting materials: Post-consumer plastic waste (PET, PE, PP, PS, PVC, mixtures). Product: Recycled polymer, monomers, or oils and waxes.

**Which papers is “Polymer recycling: mechanical, chemical and enzymatic routes compared” based on?** Geyer, Jambeck & Law, “Production, use, and fate of all plastics ever made”, Sci. Adv. 2017 (doi:10.1126/sciadv.1700782); Schyns & Shaver, “Mechanical recycling of packaging plastics: a review”, Macromol. Rapid Commun. 2021 (doi:10.1002/marc.202000415); Vollmer et al., “Beyond mechanical recycling: giving new life to plastic waste”, Angew. Chem. Int. Ed. 2020 (doi:10.1002/anie.201915651); Celik et al., “Upcycling single-use polyethylene into high-quality liquid products”, ACS Cent. Sci. 2019 (doi:10.1021/acscentsci.9b00722); Sullivan et al., “Mixed plastics waste valorization through tandem chemical oxidation and biological funneling”, Science 2022 (doi:10.1126/science.abo4626); Yoshida et al., “A bacterium that degrades and assimilates poly(ethylene terephthalate)”, Science 2016 (doi:10.1126/science.aad6359); Tournier et al., “An engineered PET depolymerase to break down and recycle plastic bottles”, Nature 2020 (doi:10.1038/s41586-020-2149-4).

**Can I edit the “Polymer recycling: mechanical, chemical and enzymatic routes compared” template?** Yes. Open it in the LabCanvas editor: all 151 layers are editable, including 4 generated objects (structures, plots, equipment) with their own settings. Change the text, colours and layout, then export PNG, TIFF or PDF at the width and DPI the journal asks for.

**Do I need an account to use this template?** Not to view it here. To open and edit it, sign in to LabCanvas or create a free account (the free plan keeps up to 3 designs). Downloading the figure is part of LabCanvas Pro (US$19 a month or US$199 a year).
