# TMD phase engineering and heterostructures: 2H, 1T, stacked and stitched

> A phase switch and a quilt: semiconducting 2H-MoS₂ (trigonal prismatic) turns into metallic 1T (octahedral) on lithium intercalation and back on annealing; the metallic phase makes low-resistance contacts, catalyses hydrogen evolution and can be written by laser into MoTe₂. Below, monolayers are stacked into type-II bilayers with an interlayer exciton, or stitched edge to edge into lateral p–n junctions.

- Page: https://www.labcanvas.com/templates/graphical-abstracts/tmd-phase-engineering-heterostructures-2h-1t-stacked-stitched
- Open in the LabCanvas editor (LabCanvas account): https://www.labcanvas.com/editor.html?template=tmd-2h-1t-phase-engineering-and-heterostructures
- Updated: 2026-10-14
- Category: Graphical abstracts
- Method: Graphical abstract
- Starting materials: Semiconducting 2H-MoS₂ and its relatives (WS₂, MoSe₂, WSe₂, MoTe₂)
- Product: Metallic 1T and 1T′ regions, and vertical and lateral TMD heterostructures
- Key result: Contacts 200–300 Ω µm vs 0.7–10 kΩ µm (Kappera et al. 2014); HER Tafel 40 mV/dec (Voiry et al. 2013), 10 mA cm⁻² at −187 mV (Lukowski et al. 2013); MoTe₂ mobility ~50× (Cho et al. 2015)
- Figure: 1920 × 1080 px, 74 editable layers (6 generated objects with settings)

## Steps

1. **Throw the switch**: Li intercalation turns 2H-MoS₂ into a metastable metallic phase; annealing restores the semiconductor, with band-gap photoluminescence above 300 °C (Eda et al. 2011)
2. **1T contacts**: Locally induced 1T electrodes cut contact resistance from 0.7–10 kΩ µm to 200–300 Ω µm; on/off > 10⁷ (Kappera et al. 2014)
3. **1T catalysts**: Metallic 1T-MoS₂ nanosheets evolve H₂ with Tafel slopes of 40–43 mV/dec; the basal plane, not only the edges, is active (Voiry et al. 2013; Lukowski et al. 2013)
4. **Laser-written 1T′**: A laser patterns 1T′ contacts into 2H-MoTe₂: an ohmic homojunction stable to 300 °C, ~50× the mobility (Cho et al. 2015)
5. **Stack or stitch**: WS₂ grows on top of MoS₂ (type II, interlayer exciton) at high temperature or at its edges (lateral p–n junctions) at low temperature (Gong et al. 2014); lateral WSe₂–WS₂ diodes and inverters (Duan et al. 2014)

## Uses

- Graphical abstracts on TMD polymorphs and phase engineering
- Talks on 2D contacts, 2D electrocatalysts and TMD heterostructures
- Teaching trigonal prismatic vs octahedral coordination and band alignment

## References

1. Eda et al., “Photoluminescence from chemically exfoliated MoS2”, Nano Lett. 2011. https://doi.org/10.1021/nl201874w (primary)
2. Kappera et al., “Phase-engineered low-resistance contacts for ultrathin MoS2 transistors”, Nat. Mater. 2014. https://doi.org/10.1038/nmat4080 (primary)
3. Voiry et al., “Conducting MoS2 nanosheets as catalysts for hydrogen evolution reaction”, Nano Lett. 2013. https://doi.org/10.1021/nl403661s (primary)
4. Lukowski et al., “Enhanced hydrogen evolution catalysis from chemically exfoliated metallic MoS2 nanosheets”, J. Am. Chem. Soc. 2013. https://doi.org/10.1021/ja404523s (primary)
5. Cho et al., “Phase patterning for ohmic homojunction contact in MoTe2”, Science 2015. https://doi.org/10.1126/science.aab3175 (primary)
6. Gong et al., “Vertical and in-plane heterostructures from WS2/MoS2 monolayers”, Nat. Mater. 2014. https://doi.org/10.1038/nmat4091 (primary)
7. Duan et al., “Lateral epitaxial growth of two-dimensional layered semiconductor heterojunctions”, Nat. Nanotechnol. 2014. https://doi.org/10.1038/nnano.2014.222 (primary)
8. Chhowalla et al., “The chemistry of two-dimensional layered transition metal dichalcogenide nanosheets”, Nat. Chem. 2013. https://doi.org/10.1038/nchem.1589 (review)

Credit: Drawn by LabCanvas after Eda et al., Nano Lett. 2011 (doi:10.1021/nl201874w); Kappera et al., Nat. Mater. 2014 (doi:10.1038/nmat4080); Voiry et al., Nano Lett. 2013 (doi:10.1021/nl403661s); Lukowski et al., J. Am. Chem. Soc. 2013 (doi:10.1021/ja404523s); Cho et al., Science 2015 (doi:10.1126/science.aab3175); Gong et al., Nat. Mater. 2014 (doi:10.1038/nmat4091); Duan et al., Nat. Nanotechnol. 2014 (doi:10.1038/nnano.2014.222). Devices and band offsets schematic.

## Questions

**What does the “TMD phase engineering and heterostructures: 2H, 1T, stacked and stitched” template show?** A phase switch and a quilt: semiconducting 2H-MoS₂ (trigonal prismatic) turns into metallic 1T (octahedral) on lithium intercalation and back on annealing; the metallic phase makes low-resistance contacts, catalyses hydrogen evolution and can be written by laser into MoTe₂. Below, monolayers are stacked into type-II bilayers with an interlayer exciton, or stitched edge to edge into lateral p–n junctions.

**What are the steps shown in “TMD phase engineering and heterostructures: 2H, 1T, stacked and stitched”?** 1. Throw the switch: Li intercalation turns 2H-MoS₂ into a metastable metallic phase; annealing restores the semiconductor, with band-gap photoluminescence above 300 °C (Eda et al. 2011). 2. 1T contacts: Locally induced 1T electrodes cut contact resistance from 0.7–10 kΩ µm to 200–300 Ω µm; on/off > 10⁷ (Kappera et al. 2014). 3. 1T catalysts: Metallic 1T-MoS₂ nanosheets evolve H₂ with Tafel slopes of 40–43 mV/dec; the basal plane, not only the edges, is active (Voiry et al. 2013; Lukowski et al. 2013). 4. Laser-written 1T′: A laser patterns 1T′ contacts into 2H-MoTe₂: an ohmic homojunction stable to 300 °C, ~50× the mobility (Cho et al. 2015). 5. Stack or stitch: WS₂ grows on top of MoS₂ (type II, interlayer exciton) at high temperature or at its edges (lateral p–n junctions) at low temperature (Gong et al. 2014); lateral WSe₂–WS₂ diodes and inverters (Duan et al. 2014).

**What are the starting materials and the product?** Starting materials: Semiconducting 2H-MoS₂ and its relatives (WS₂, MoSe₂, WSe₂, MoTe₂). Product: Metallic 1T and 1T′ regions, and vertical and lateral TMD heterostructures.

**Which papers is “TMD phase engineering and heterostructures: 2H, 1T, stacked and stitched” based on?** Eda et al., “Photoluminescence from chemically exfoliated MoS2”, Nano Lett. 2011 (doi:10.1021/nl201874w); Kappera et al., “Phase-engineered low-resistance contacts for ultrathin MoS2 transistors”, Nat. Mater. 2014 (doi:10.1038/nmat4080); Voiry et al., “Conducting MoS2 nanosheets as catalysts for hydrogen evolution reaction”, Nano Lett. 2013 (doi:10.1021/nl403661s); Lukowski et al., “Enhanced hydrogen evolution catalysis from chemically exfoliated metallic MoS2 nanosheets”, J. Am. Chem. Soc. 2013 (doi:10.1021/ja404523s); Cho et al., “Phase patterning for ohmic homojunction contact in MoTe2”, Science 2015 (doi:10.1126/science.aab3175); Gong et al., “Vertical and in-plane heterostructures from WS2/MoS2 monolayers”, Nat. Mater. 2014 (doi:10.1038/nmat4091); Duan et al., “Lateral epitaxial growth of two-dimensional layered semiconductor heterojunctions”, Nat. Nanotechnol. 2014 (doi:10.1038/nnano.2014.222); Chhowalla et al., “The chemistry of two-dimensional layered transition metal dichalcogenide nanosheets”, Nat. Chem. 2013 (doi:10.1038/nchem.1589).

**Can I edit the “TMD phase engineering and heterostructures: 2H, 1T, stacked and stitched” template?** Yes. Open it in the LabCanvas editor: all 74 layers are editable, including 6 generated objects (structures, plots, equipment) with their own settings. Change the text, colours and layout, then export PNG, TIFF or PDF at the width and DPI the journal asks for.

**Do I need an account to use this template?** Not to view it here. To open and edit it, sign in to LabCanvas or create a free account (the free plan keeps up to 3 designs). Downloading the figure is part of LabCanvas Pro (US$19 a month or US$199 a year).
