# Nanoparticles in tests, catalysts and devices

> Six applications of nanoparticles outside medicine: colorimetric detection with oligonucleotide–gold probes, the lateral flow strip, plasmonic hot-electron photocatalysis, the three-way catalytic converter, quantum-dot colour conversion on blue micro-LEDs and mineral sunscreens of TiO₂ and ZnO. Schematics only, with every caption quoted from the cited papers.

- Page: https://www.labcanvas.com/templates/nanomaterial-guides/nanoparticles-tests-catalysts-devices
- Open in the LabCanvas editor (LabCanvas account): https://www.labcanvas.com/editor.html?template=nano-tests-catalysts-devices
- Updated: 2026-10-14
- Category: Nanomaterial guides
- Method: Applications
- Product: How gold, platinum-group metal, quantum-dot and oxide nanoparticles work in tests, catalysts, displays and sunscreens
- Key result: Schematics drawn by LabCanvas from the cited papers; no spectrum, signal or micrograph is shown, and parts are not to scale
- Figure: 1920 × 1080 px, 45 editable layers (6 generated objects with settings)

## Steps

1. **Colorimetric gold probes**: Gold nanoparticle probes carry mercaptoalkyl-oligonucleotides; a single-stranded 30-base target links them into a polymeric network, and the solution turns from red to pinkish/purple; the networks melt over a narrow temperature range, which told imperfect targets apart; spotted on a reverse-phase silica plate the mixture dried blue, and the unoptimized system detected about 10 femtomoles of an oligonucleotide (Elghanian 1997)
2. **Lateral flow test**: The sample moves along the strip by capillary action, with no external force, and the result shows within 5–30 min; the conjugate pad holds antibodies conjugated to coloured or fluorescent particles, most commonly colloidal gold; the nitrocellulose membrane (pore sizes 0.05–12 µm) carries the test and control lines. In the sandwich format a test line means positive; in the competitive format, used for small molecules, a missing test line means positive; the control line shows that the liquid flowed (Koczula 2016)
3. **Hot-electron photocatalysis**: A plasmon decays without emitting light into electron–hole pairs within about 1–100 fs, hot electrons above and hot holes below the Fermi level; a semiconductor in contact takes up the hot electrons, extending their lifetimes to nanoseconds, so that oxidation and reduction run apart on the metal and on the oxide; the Schottky barrier is the main hurdle; making H₂ from water needs more than 1.23 eV (< 1,008 nm) per photon (Kumar 2019)
4. **Three-way catalytic converter**: Three-way catalysts carry platinum group metals as the active phase, palladium and platinum for CO and hydrocarbon oxidation and rhodium mainly for NOₓ reduction, on a CeO₂–ZrO₂ washcoat coated on the walls of a cordierite monolith, one layer about 50–150 µm thick; a copper–palladium–rhodium nanocatalyst used up to 85 % less platinum group metal than commercial converters, with similar or better activity (Yakoumis 2021)
5. **Quantum-dot colour conversion**: Red and green CdSe/ZnS quantum-dot films under 17 µm thick let only about 0.1 % of the blue excitation through, so the conversion layer also suppresses the residual blue without colour filters; TiO₂ nanoparticles added for scattering raised the luminous intensity by more than 10 % (Hyun 2021). Perovskite quantum dots filled into a flexible layer by microfluidics gave a full-colour micro-LED display with a 200 µm pixel pitch (Li 2022)
6. **Mineral sunscreens**: Sunscreens protect against UVB (290–320 nm) and UVA (320–400 nm); TiO₂ is more effective in the UVB and ZnO in the UVA (Smijs 2011). TiO₂ and ZnO protect mainly by absorbing UV across their band gap and reflect only about 4–5 % of it (Cole 2016). Nanoparticles (< 100 nm) remove the opaque look of microsized particles; silica-based coatings are the most effective against photocatalytic effects (Smijs 2011)

## Strengths

- A lateral flow result shows within 5–30 min with no external force (Koczula 2016)
- Quantum-dot films hold back the residual blue without colour filters (Hyun 2021)
- A Cu–Pd–Rh nanocatalyst used up to 85 % less platinum group metal (Yakoumis 2021)

## Limitations

- The Schottky barrier is the main hurdle to injecting hot electrons (Kumar 2019)
- Smaller sunscreen particles can shift the balance between UVA and UVB protection (Smijs 2011)

## References

1. Elghanian et al., “Selective colorimetric detection of polynucleotides based on the distance-dependent optical properties of gold nanoparticles”, Science 1997. https://doi.org/10.1126/science.277.5329.1078 (primary)
2. Koczula & Gallotta, “Lateral flow assays”, Essays Biochem. 2016. https://doi.org/10.1042/EBC20150012 (primary)
3. Kumar et al., “Harnessing plasmon-induced hot carriers at the interfaces with ferroelectrics”, Front. Chem. 2019. https://doi.org/10.3389/fchem.2019.00299 (primary)
4. Yakoumis, “PROMETHEUS: a copper-based polymetallic catalyst for automotive applications. Part I: synthesis and characterization”, Materials 2021. https://doi.org/10.3390/ma14030622 (primary)
5. Hyun et al., “Dual role of quantum dots as color conversion layer and suppression of input light for full-color micro-LED displays”, J. Phys. Chem. Lett. 2021. https://doi.org/10.1021/acs.jpclett.1c00321 (primary)
6. Cole, Shyr & Ou-Yang, “Metal oxide sunscreens protect skin by absorption, not by reflection or scattering”, Photodermatol. Photoimmunol. Photomed. 2016. https://doi.org/10.1111/phpp.12214 (primary)
7. Smijs & Pavel, “Titanium dioxide and zinc oxide nanoparticles in sunscreens: focus on their safety and effectiveness”, Nanotechnol. Sci. Appl. 2011. https://doi.org/10.2147/NSA.S19419 (primary)
8. Li et al., “Flexible quantum-dot color-conversion layer based on microfluidics for full-color micro-LEDs”, Micromachines 2022. https://doi.org/10.3390/mi13030448 (further reading)

Credit: Drawn by LabCanvas after Koczula & Gallotta, Essays Biochem. 2016 (doi:10.1042/EBC20150012), Elghanian et al., Science 1997, Cole, Shyr & Ou-Yang, Photodermatol. Photoimmunol. Photomed. 2016 and Kumar et al., Front. Chem. 2019, and the papers in the details.

## Questions

**What does the “Nanoparticles in tests, catalysts and devices” template show?** Six applications of nanoparticles outside medicine: colorimetric detection with oligonucleotide–gold probes, the lateral flow strip, plasmonic hot-electron photocatalysis, the three-way catalytic converter, quantum-dot colour conversion on blue micro-LEDs and mineral sunscreens of TiO₂ and ZnO. Schematics only, with every caption quoted from the cited papers.

**What are the steps shown in “Nanoparticles in tests, catalysts and devices”?** 1. Colorimetric gold probes: Gold nanoparticle probes carry mercaptoalkyl-oligonucleotides; a single-stranded 30-base target links them into a polymeric network, and the solution turns from red to pinkish/purple; the networks melt over a narrow temperature range, which told imperfect targets apart; spotted on a reverse-phase silica plate the mixture dried blue, and the unoptimized system detected about 10 femtomoles of an oligonucleotide (Elghanian 1997). 2. Lateral flow test: The sample moves along the strip by capillary action, with no external force, and the result shows within 5–30 min; the conjugate pad holds antibodies conjugated to coloured or fluorescent particles, most commonly colloidal gold; the nitrocellulose membrane (pore sizes 0.05–12 µm) carries the test and control lines. In the sandwich format a test line means positive; in the competitive format, used for small molecules, a missing test line means positive; the control line shows that the liquid flowed (Koczula 2016). 3. Hot-electron photocatalysis: A plasmon decays without emitting light into electron–hole pairs within about 1–100 fs, hot electrons above and hot holes below the Fermi level; a semiconductor in contact takes up the hot electrons, extending their lifetimes to nanoseconds, so that oxidation and reduction run apart on the metal and on the oxide; the Schottky barrier is the main hurdle; making H₂ from water needs more than 1.23 eV (< 1,008 nm) per photon (Kumar 2019). 4. Three-way catalytic converter: Three-way catalysts carry platinum group metals as the active phase, palladium and platinum for CO and hydrocarbon oxidation and rhodium mainly for NOₓ reduction, on a CeO₂–ZrO₂ washcoat coated on the walls of a cordierite monolith, one layer about 50–150 µm thick; a copper–palladium–rhodium nanocatalyst used up to 85 % less platinum group metal than commercial converters, with similar or better activity (Yakoumis 2021). 5. Quantum-dot colour conversion: Red and green CdSe/ZnS quantum-dot films under 17 µm thick let only about 0.1 % of the blue excitation through, so the conversion layer also suppresses the residual blue without colour filters; TiO₂ nanoparticles added for scattering raised the luminous intensity by more than 10 % (Hyun 2021). Perovskite quantum dots filled into a flexible layer by microfluidics gave a full-colour micro-LED display with a 200 µm pixel pitch (Li 2022). 6. Mineral sunscreens: Sunscreens protect against UVB (290–320 nm) and UVA (320–400 nm); TiO₂ is more effective in the UVB and ZnO in the UVA (Smijs 2011). TiO₂ and ZnO protect mainly by absorbing UV across their band gap and reflect only about 4–5 % of it (Cole 2016). Nanoparticles (< 100 nm) remove the opaque look of microsized particles; silica-based coatings are the most effective against photocatalytic effects (Smijs 2011).

**Which papers is “Nanoparticles in tests, catalysts and devices” based on?** Elghanian et al., “Selective colorimetric detection of polynucleotides based on the distance-dependent optical properties of gold nanoparticles”, Science 1997 (doi:10.1126/science.277.5329.1078); Koczula & Gallotta, “Lateral flow assays”, Essays Biochem. 2016 (doi:10.1042/EBC20150012); Kumar et al., “Harnessing plasmon-induced hot carriers at the interfaces with ferroelectrics”, Front. Chem. 2019 (doi:10.3389/fchem.2019.00299); Yakoumis, “PROMETHEUS: a copper-based polymetallic catalyst for automotive applications. Part I: synthesis and characterization”, Materials 2021 (doi:10.3390/ma14030622); Hyun et al., “Dual role of quantum dots as color conversion layer and suppression of input light for full-color micro-LED displays”, J. Phys. Chem. Lett. 2021 (doi:10.1021/acs.jpclett.1c00321); Cole, Shyr & Ou-Yang, “Metal oxide sunscreens protect skin by absorption, not by reflection or scattering”, Photodermatol. Photoimmunol. Photomed. 2016 (doi:10.1111/phpp.12214); Smijs & Pavel, “Titanium dioxide and zinc oxide nanoparticles in sunscreens: focus on their safety and effectiveness”, Nanotechnol. Sci. Appl. 2011 (doi:10.2147/NSA.S19419); Li et al., “Flexible quantum-dot color-conversion layer based on microfluidics for full-color micro-LEDs”, Micromachines 2022 (doi:10.3390/mi13030448).

**Can I edit the “Nanoparticles in tests, catalysts and devices” template?** Yes. Open it in the LabCanvas editor: all 45 layers are editable, including 6 generated objects (structures, plots, equipment) with their own settings. Change the text, colours and layout, then export PNG, TIFF, SVG or PDF.

**Do I need an account to use this template?** Not to view it here. To open and edit it, sign in to LabCanvas or create a free account (the free plan keeps up to 3 designs). Downloading the figure is part of LabCanvas Pro (US$19 a month or US$199 a year).