LabCanvas

Free lab calculators

31 calculators for everyday lab work, grouped by task: making up solutions, molecular biology, cell culture, assays and curve fitting, electrochemistry and materials characterisation. Each page shows the formula, a worked example with real numbers and the references, and runs in your browser with nothing uploaded and no account.

Last updated

Solutions, dilutions and concentrations

Making up buffers and stock solutions: how much to weigh, how much stock to pipette, and how to convert one concentration unit into another.

  • Molarity calculatorGrams to weigh for a molar solution (m = C × V × M), or the molarity or volume from a mass.
  • Dilution calculatorC₁V₁ = C₂V₂ for whichever value is missing, and serial dilutions planned tube by tube.
  • Concentration converterConvert between M, mg/mL, % w/v, % w/w, ppm, molality and normality.
  • Molar mass calculatorMolar mass from a chemical formula, hydrates and brackets included, with the mass % of each element.
  • pH calculatorpH of strong and weak acids, bases and buffers (Henderson–Hasselbalch), with a pKa table.
  • Chemical equation balancerBalance a chemical equation exactly, with ions, electrons and hydrates, and check the atoms.

Molecular biology

Nucleic acids and proteins: concentrations from absorbance, primers, cloning, relative expression and band sizes.

Cell culture

Counting, seeding and growing cells, and spinning them down at the right force.

Assays and curve fitting

Plate-reader and enzyme data: standard curves, dose–response and kinetics, fitted with the same least-squares code as the LabCanvas Graph app.

Electrochemistry and batteries

Electrocatalysis, supercapacitors and batteries: potentials, efficiencies and capacitance from your measurements.

Materials characterisation

Numbers from spectra, diffraction, isotherms and micrographs.

How-to guides

Questions about the lab calculators

Are these lab calculators free?

Yes. Every calculator is free, needs no account and runs in your browser: the numbers you type stay on your device, and are remembered there for next time.

How do I know the results are right?

Each calculator page shows the formula it uses, a worked example with real numbers, and the references for the method. The curve fits (ELISA 4PL, IC50, Michaelis–Menten) use the least-squares fitter of the LabCanvas Graph app, which is validated against SciPy. Check the result against your protocol before you use it.

Which calculator do I need to make a buffer or a stock solution?

The molarity calculator gives the mass to weigh for a molar concentration and volume; the dilution calculator gives the volume of stock for a working solution (C₁V₁ = C₂V₂); the concentration converter turns M into mg/mL, % w/v or ppm; and the pH calculator gives the acid-to-base ratio for a buffer at a target pH.

Can I use the calculators inside the LabCanvas apps?

Yes. The most used ones, such as molarity, dilution, pH, primer Tm and centrifuge g-force, also open from the Lab calculators button in the top bar of the LabCanvas apps. They run the same code as these pages, so they give the same results.

Graph the results

The LabCanvas Graph app plots standard curves, dose–response fits and bar charts with statistics, ready for a paper. Free to start in your browser.

Open the Graph app All free tools