Graphical abstract template · Battery materials · Rocking-chair cell
How a lithium-ion battery works
A lithium-ion battery stores energy by moving lithium ions between two host materials. Charging drives Li⁺ out of layered LiCoO₂, through the electrolyte and into graphite while electrons go round the outside circuit; on discharge both flow back and power the load. The electrolyte only survives between its LUMO and HOMO, and graphite sits above that window, so a thin passivating layer (the SEI) has to form for the cell to work.
Updated 5 cited papers79 editable layers
At a glance
- Category
- Battery materials
- Method
- Rocking-chair cell
- Starting materials
- Graphite on copper foil (negative), LiCoO₂ on aluminium foil (positive), a porous separator, LiPF₆ in carbonate solvents
- Product
- A cell that stores and returns energy as lithium ions move between the two hosts
- Key result
- Theoretical capacities from the formulas: LiC₆ 372 mAh g⁻¹; LiCoO₂ 274 mAh g⁻¹ if all its lithium left, about half of which is used in practice
- Figure
- 1920 × 1080 px (16:9), 79 editable layers, 4 generated objects
Step by step
- ChargeA power supply drives Li⁺ out of LiCoO₂ into graphite; electrons take the outside circuit
- DischargeLi⁺ goes back into the layered oxide while electrons flow through the load
- Two hostsLithium sits between graphene layers (LiC₆) or between CoO₂ slabs; neither host is consumed
- Electrolyte windowThe electrolyte is stable between its LUMO and HOMO; graphite lies above the LUMO, so a passivating SEI forms (Goodenough & Park 2013)
Strengths
- Light, high-voltage chemistry
- The same ions shuttle back and forth: hundreds of cycles or more
Limitations
- The SEI consumes lithium on the first charge
- Organic electrolytes are flammable
Uses
- Phones and laptops
- Electric vehicles
- Grid storage
Papers this template follows
- Goodenough & Park, “The Li-Ion Rechargeable Battery: A Perspective”, J. Am. Chem. Soc. 2013. doi:10.1021/ja3091438review
- Armand & Tarascon, “Building better batteries”, Nature 2008. doi:10.1038/451652areview
- Mizushima, Jones, Wiseman & Goodenough, “LixCoO2 (0<x≤1): A new cathode material for batteries of high energy density”, Mater. Res. Bull. 1980. doi:10.1016/0025-5408(80)90012-4primary
- Whittingham, “Lithium Batteries and Cathode Materials”, Chem. Rev. 2004. doi:10.1021/cr020731creview
- Xu, “Nonaqueous Liquid Electrolytes for Lithium-Based Rechargeable Batteries”, Chem. Rev. 2004. doi:10.1021/cr030203gfurther reading
After Goodenough & Park, JACS 2013 (doi:10.1021/ja3091438) and Armand & Tarascon, Nature 2008 (doi:10.1038/451652a). Cells schematic; crystals from their structures; capacities computed from the formulas.
How templates are written and checked: editorial guidelines.
Questions
What does the “How a lithium-ion battery works” template show?
A lithium-ion battery stores energy by moving lithium ions between two host materials. Charging drives Li⁺ out of layered LiCoO₂, through the electrolyte and into graphite while electrons go round the outside circuit; on discharge both flow back and power the load. The electrolyte only survives between its LUMO and HOMO, and graphite sits above that window, so a thin passivating layer (the SEI) has to form for the cell to work.
What are the steps shown in “How a lithium-ion battery works”?
1. Charge: A power supply drives Li⁺ out of LiCoO₂ into graphite; electrons take the outside circuit. 2. Discharge: Li⁺ goes back into the layered oxide while electrons flow through the load. 3. Two hosts: Lithium sits between graphene layers (LiC₆) or between CoO₂ slabs; neither host is consumed. 4. Electrolyte window: The electrolyte is stable between its LUMO and HOMO; graphite lies above the LUMO, so a passivating SEI forms (Goodenough & Park 2013).
What are the starting materials and the product?
Starting materials: Graphite on copper foil (negative), LiCoO₂ on aluminium foil (positive), a porous separator, LiPF₆ in carbonate solvents. Product: A cell that stores and returns energy as lithium ions move between the two hosts.
Which papers is “How a lithium-ion battery works” based on?
Goodenough & Park, “The Li-Ion Rechargeable Battery: A Perspective”, J. Am. Chem. Soc. 2013 (doi:10.1021/ja3091438); Armand & Tarascon, “Building better batteries”, Nature 2008 (doi:10.1038/451652a); Mizushima, Jones, Wiseman & Goodenough, “LixCoO2 (0<x≤1): A new cathode material for batteries of high energy density”, Mater. Res. Bull. 1980 (doi:10.1016/0025-5408(80)90012-4); Whittingham, “Lithium Batteries and Cathode Materials”, Chem. Rev. 2004 (doi:10.1021/cr020731c); Xu, “Nonaqueous Liquid Electrolytes for Lithium-Based Rechargeable Batteries”, Chem. Rev. 2004 (doi:10.1021/cr030203g).
Can I edit the “How a lithium-ion battery works” template?
Yes. Open it in the LabCanvas editor: all 79 layers are editable, including 4 generated objects (structures, plots, equipment) with their own settings. Change the text, colours and layout, then export PNG, TIFF, SVG or PDF.
Do I need an account to use this template?
Not to view it here. To open and edit it, sign in to LabCanvas or create a free account (the free plan keeps one design of each kind). Downloading the figure is part of LabCanvas Pro (US$19 a month or US$199 a year).
